User manual KAWAI DRP-10

[. . . ] Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product. Where the applicable license entitles you to the source code of such software and/or other additional data, such data should have been shipped along with this product. You may also download it for free from http://support. [. . . ] In the URL Blocking Capacity field, click Disable or Enable. In the Keyword field, enter the keyword that you want to block. Click Add Keyword to add the keyword to the URL Blocking Table. Configuring the NAT Exclude IP settings The NAT Exclude IP page allows you to configure the IP range to be excluded from your router's NAT pool. In the IP Range field, key in the IP range that you want to exclude from your router's NAT pool. 6 DRP-10 Chapter 4: Configuring via the web GUI Configuring the ALG settings The NAT ALG and Passthrough page allows you to allow certain protocols or applications to pass through your network's firewall. Select the protocols or applications that you want to enable. Chapter 4: Configuring via the web GUI DRP-10 7 Configuring the UPnP settings The UPnP (Universal Plug and Play) Configuration page allows you to access the media of the UPnP devices found in your network. In the UPnP field, tick Enable to enable UPnP connection. In the WAN Interface dropdown list, choose a network protocol group to enable the UPnP connection. 8 DRP-10 Chapter 4: Configuring via the web GUI Configuring the IGMP Configuration settings The IGMP (Internet Group Management Protocol) Proxy Configuration page allows you to configure the amount of IPTV packets that can be received through a proxy. Click Save Log to File to save a copy of logs information to your local drive. Click Clear Log Table to clear the system logs from the table. 44 DRP-10 Chapter 4: Configuring via the web GUI Configuring the user account settings The User Account Configuration page allows you to create, modify, or delete user accounts. In the User Name field, key in the desired user name. In the Privilege dropdown list, select the privilege type: Root or User. Key in your password to the New Password and Confirm Password fields. Click Add to add your new account to the User Account Table. In the User Account Table, tick the user account to be modified. Key in your old password in the Old Password field. Key in your password to the New Password and Confirm Password fields. NOTE: You can only modify the user account's new password. [. . . ] However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. [. . . ]