User manual KAWAI ES1

[. . . ] 10 11 11 11 12 12 13 14 15 15 16 16 17 17 18 20 21 ­2­ Important Safety Instructions SAVE THESE INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. AVIS : RISQUE DE CHOC ELECTRIQUE The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - NE PAS OUVRIR. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the leterature accompanying the product. Examples of Picture Symbols denotes that care should be taken. The example instructs the user to take care not to allow fingers to be trapped. The example instructs that disassembly of the product is prohibited. [. . . ] -PLAY/STOP button: Used to play back and stop a recorded song. -RECORD button: Used to start recording a song. FUNCTION SECTION (F) Use these buttons to select a touch type, transpose the keyboard, or control other features (including MIDI functions). POWER BUTTON (G) This button turns the instrument on and off. Be sure to turn off the instrument when you are finished playing. FRONT PANEL A B C D E F G ­8­ SOFT PEDAL ( H) Pressing this pedal softens the sound and also reduces its volume. * The soft pedal can be used as the sostenuto pedal by turning on the power while depressing this pedal. SOSTENUTO PEDAL Depressing this pedal after pressing the keyboard and before releasing the keys sustains the sound of only the keys just played. SUSTAIN PEDAL (I) Pressing this pedal sustains the sound even after you remove your hands from the keyboard. LINE IN/OUT JACKS (J) Connect an external amplifer and speakers, or a cassette recorder to these jacks. MIDI JACKS (K) Use these jacks to connect the piano with external MIDI devices. NOTE: Starting another recording will delete the song you previously recorded. METRONOME/SELECT TIME AND TEMPO The piano's metronome function can help you record a song by providing a steady beat for you to play along with. The metronome beats however, are not recorded. (1) To start the metronome, press the TOUCH and TRANSPOSE buttons at the same time. If you want to you can change the beat (time signature) of the metronome. The piano has five beats (time signatures) to choose from, 1/4, 2/4, 3/4, 4/4, and 6/8. While holding down the TOUCH and TRANSPOSE buttons, select the desired beat (time signature) of the metronome by pressing the TONE button assigned to that beat (time signature). (2) To adjust the tempo, press the VIBRA-PHONE button while holding down the TOUCH and TRANSPOSE buttons to make the tempo slower or press the STRINGS button while holding down the TOUCH and TRANSPOSE buttons to make the tempo faster. (3) To turn off the metronome function, press the TOUCH and TRANSPOSE buttons at the same time and the metronome will stop. 2. PLAYING BACK A SONG (1) Press the PLAY/STOP button. The song will be played back using the same tone (sound) with which it was recorded. (2) Press the PLAY/STOP button once again to stop the playback. [. . . ] TONE NAME CLASSIC GRAND MODERN PIANO E. PIANO CHURCH ORGAN HARPSICHORD VIBRAPHONE STRINGS PRG # 1 2 3 4 5 6 7 PRG # (When Multi-Timbral mode is ON) 1 2 5 20 7 12 49 (1) If you press any B-flat key while holding down the TOUCH and TRANSPOSE buttons, this function is set to "off" and the piano does not transmit the program change data corresponding to the tone selected on the panel. If you press the B-flat key again while holding down the TOUCH and TRANSPOSE buttons, this function returns to "on" and selecting a tone will transmit the data. (2) Release both hands after selecting either "on" or "off" for transmit MIDI program change. When the power is first turned on, the TRANSMIT MIDI PROGRAM CHANGE function is always "on". 5. [. . . ]