User manual KAWAI FS650

[. . . ] Contact our Customer Support Center for the latest information relating to product names and model numbers. · The illustration of the screen and the recorder shown in this manual may differ from the actual product. The utmost care has been taken to ensure the integrity of this document, but if you find a questionable item, error or omission, please contact our Customer Support Center. · Any liability for passive damages or damage of any kind occurred due to data loss incurred by a defect of the product, repair performed by the third party other than Olympus or an Olympus authorized service station, or any other reason is excluded. [. . . ] By default the Author ID is set to "DS3500". Setting an Author ID Setting the Work Type Up to 20 Work Types can be registered and uploaded to the recorder using the ODMS software. Each Work Type can have up to 10 optional items associated with it. Work Types and Optional Items can be used on the recorder to populate the file header information. Refer to the ODMS software online help for registering/setting up Optional Items through the ODMS software ( P. 46). The Work Type information of the recorded or uploaded files can be edited with the menu settings of the recorder ( P. 39). 1 Turn ON the recorder. 3 Setting the Author ID and Work Type EN · When [Prompt for author ID at Power-on. ] has been set through ODMS software ( P. 43), the registered Author ID list will appear. 1 While the recorder is in stop mode, press the NEW button. · When [Prompt for Worktype ID on new recordings. ] has been set through ODMS software ( P. 43), the Work Types uploaded to the recorder will appear in a list. 2 Press the + or ­ button to select the Author ID that you want to assign to the recorder from the ID list. 3 Press the OK/MENU button to set the ID. · When more than one Author ID exists/ is registered on the recorder, the ID list will be displayed. 2 Press the + or ­ button to select a Work Type from the Work Type list. 3 Press the OK/MENU button to set the Work Type. Note · Up to 10 Author ID entries can be registered (up to a maximum of 16 characters). · The selected Work Type and a maximum of 20 Optional Items associated to it can be recorded as file header information. · It is possible to add an extra Value to the Optional Items list of the selected Work Type. In order to do so, go to the Work Type information screen ( P. 39). For more details, refer to the online help for ODMS software ( P. 46). 30 Verbal Comment Verbal comments are useful to append vocal instructions while recording. · Each time the F2 (PRIORITY ) button is pressed the Priority level will change (High/Normal). Pending When you set [Pending] to the file, the file becomes "Pending file". If "Download file" is set to "Finished file" by ODMS software, the [Pending] file is not transferred and only [Finished] file (edited file) will be transferred to your PC. [Pending]: Sets to a file of "Editing" and [ ] will appear on the display. [Finished]: Sets to a file of "already edited". File Lock The File lock function allows you to prevent important files from being accidentally erased. [On]: Locks the file and prevents it from being erased. [Off ]: Unlocks the file and allows it to be erased. Work Type The Work Type information of the recorded or uploaded files can be edited with the menu settings of the recorder. For details, see " Editing the Work Type information" ( P. 39). Information The recorder can display a variety of information related to the current file. Rec Menu Mic Sense You can switch between two microphone sensitivities to meet recording needs: [Dictation] for oral dictation and [Conference] which is suited for situations like meetings and conferences with a small number of people. [. . . ] 19 h. 4 DS2 format: [DSS Pro QP] [DSS Pro SP] 99 h. 59 min. MP3 format: [256kbps] [128kbps] Approx. 20 h. 4 Linear PCM format: [PCM ST] Approx. 20 min. Guide to recording times The following values are strictly references. 4 MP3 format: [256kbps] [128kbps] Approx. [. . . ]