User manual KAWAI FS680

[. . . ] The screen and camera illustrations shown in this manual may differ from the actual product. Checking the contents of the box or Digital camera Strap Lithium Ion Battery (LI-90B) USB-AC adapter (F-2AC) USB cable (CB-USB8) AV cable (CB-AVC3) KAWAI Setup CD-ROM Other accessories not shown: Warranty card Contents may vary depending on purchase location. Names of Parts Camera unit 8 1 2 3 4 10 9 1 2 3 4 5 6 7 8 7 11 12 13 14 3 5 6 Connector cover Connector cover lock LOCK knob Speaker Multi-connector HDMI micro connector Strap eyelet Self-timer lamp/LED Illuminator/ AF illuminator 9 Flash 10 Lens 11 Lens ring 12 Tripod socket 13 Battery/card compartment cover 14 Battery/card compartment lock 2 EN 3 1 4 5 6 7 2 8 9 10 11 12 1 2 3 4 5 6 7 8 9 Stereo microphone Monitor Shutter button Indicator lamp n button Zoom buttons R button (shooting movies) Mode dial q button (switching between shooting and playback) 10 Arrow pad INFO (changing information display) (erase) 11 A button (OK) 12 button Attaching the camera strap 1 2 3 Pull the strap tight so that it does not come loose. EN 3 Monitor Shooting mode display 1 29 28 27 26 25 24 23 P 0. 0 WB AUTO ISO AUTO 2 3 4 5 6 7 8 9 10 11 1 Shooting mode . . . . . . . p. 17, 24 2 Landmark . . . . . . . . . . . . . . . . . . . . . p. 43 3 Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 20 Flash standby/Flash charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. [. . . ] Registration is complete. EN 51 Displaying the current altitude/water depth (atmospheric/hydraulic pressure) [Manometer] d (Settings Menu 3) Tough Settings Manometer The readings may have a margin of error depending on meteorological conditions. Use the readings only for your reference. Submenu 2 Submenu 3 Off Application Cancels the manometer display. Displays the current altitude/water depth (atmospheric/hydraulic pressure) in the shooting standby mode screen. (­12 m to 5, 000 m) Proceed to the setting screen. See below. Setting the units of elevation, depth, etc. [m/ft settings] d (Settings Menu 3) Tough Settings m/ft settings Submenu 2 m/ft settings Submenu 3 m ft Application This displays in meters. This displays in feet. Operating the camera by tapping the body [Tap Control] d (Settings Menu 3) Tough Settings Tap Control Submenu 2 Submenu 3 Off On Tap Control Calibrate Application Cancels [Tap Control]. Adjusts the tap strength and intervals between multiple taps on each side of the camera body. (top, left, right, & back) Manometer On Calibrate When set to [On], a warning message appears in the monitor as a water depth close to 10 m (32. 8 ft) is reached. To adjust the altitude/water depth display 1 Use FG to select the current altitude/water depth, and press the A button to set. Calibrate Back MENU Operating during shooting mode (Example: Flash mode) 1 Tap the right or left side of the camera body once. The flash mode selection screen is displayed. When the state or province is to be displayed. When the landmark is not to be displayed. When the landmark is to be displayed. [Auto Time Adjust] applies only when x (home time zone) is selected for [World Time]. Track logs are stored in the GPSLOG folder on the memory card. A new file is created each time you select [Save]. Multiple files will be created if: The date changes during tracking You set [Track] Tracking ends automatically when: The battery is exhausted The camera is left off for more than 24 hours For information on such topics as viewing GPS tracks, see the manual for your GPS tracking software. 54 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. 2 Turn on the printer, and then connect the printer and camera. Multi-connector Open the connector cover in the direction of the arrow. USB cable (supplied) Printing images at the printer's standard settings [Easy Print] In the setup menu, set [USB Connection] to [Print]. [. . . ] When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5 Olympus' sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product, and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair, is excluded. Notes; 1 This Warranty is in addition to and does not affect the customer's statutory right. 2 lf you have any queries regarding this Warranty, call any of the Olympus authorized service stations listed in the instructions. Notes regarding warranty maintenance 1 This Warranty will only be valid if the Warranty Certificate is duly completed by Olympus or the dealer. [. . . ]