User manual KAWAI HA1

[. . . ] Stepping on or tripping over it can break or short-circuit the wire inside. The product should be connected to a power supply only of the type described in the operatiing instructions or as marked on the product. Pulling the AC power cord itself may damage the cord, causing a fire, electric shock or short-circuit. When disconnecting the AC power cord's plug, always hold the plug and pull it to remove it. 120V 230V 240V Do not attempt to service the product beyond that described in the user-maintenance instructions. All other servicing should be reffered to qualified service personnel. III This product in combination with an amplifier and headphones or speakers, may be capable or producing sound level that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. [. . . ] For example, if a track only has 10 bars in it, you cannot copy data onto bar 20. You can, however, copy data to bars 1 through 11. · Copied data replaces any current data that may be at the destination. L1 R1 L2 Selects the track to be copied. Use the Dial to select the track numbers 1-16, Tempo, or Chord. Selects the bar where the data that you are copying starts. Selects the bar where the data that you are copying ends. Use the Dial to change the bar number. R2 L2 R2 Selects the destination track. Use the Dial to select the track number 1-16, Tempo, or Chord. Selects the bar in the destination track where the copied data will be placed. L3 L3 L4 R3 R4 R3 L4 L5 R5 F1 F2 F3 F4 F5 F6 F7 F1 F2 F7 Returns you to the Advanced Recorder menu. Proceed with copying. Recording a Song P. 61 Delete Delete completely erases and removes the bars that you specify. L1 R1 R2 L2 Selects the track to be deleted. Merge can be useful for making rhythm patterns by first recording different drum/ percussion parts using the same drum kit on several tracks for easy editing of each instrument, or recording the right and left hand parts of a piano piece and combining them later on one track to free up extra tracks for more recording. · Merge does not automatically erase the track from where you copied the data. L1 R1 R2 L2 Selects the track from where you want to copy data. Choose 1-16. L2 R2 Select the track where you want this data merged to. Choose 1-16. L3 L4 R3 R4 L5 R5 F1 F2 F3 F4 F5 F6 F7 F1 F2 F7 Takes you to the Advanced Recorder menu. 66 Kawai Concert Performer Series Digital Piano Gate Time Modify Gate time refers to the length of a note as a percentage. Whatever the length of a note is when it is first recorded, this value is considered as its Gate time of 100%. By editing the length of the note, you can shorten it to 10% or lengthen it to 300% of the original value. L1 R1 R2 L2 Selects the track in which you want to modify Gate times. Selects the first bar of the data that you want to modify Gate times for. Selects the last bar of the data that you want to modify Gate times for. Use the Dial to change bars. L2 R2 L3 L3 L4 R3 R4 Adjusts the Gate time in 10% increments. Use the Dial to select a value from 10%300%. L4 L5 R5 F1 F2 F3 F4 F5 F6 F7 F1 F2 F7 Takes you to the Advanced Recorder menu. [. . . ] The CP can be connected directly to the back of your computer via a USB cable. In order for the CP and your computer to properly communicate over this USB cable, you first need to set the MIDI-USB switch located next to the MIDI jacks to USB. Also your computer must have a USB driver installed. Please read the instruction on the next page for the details about the USB driver. Appendice P. [. . . ]