User manual KAWAI HS22

[. . . ] 10 11 11 11 12 12 13 15 16 17 17 18 18 19 19 20 22 23 ­2­ Important Safety Instructions SAVE THESE INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the leterature accompanying the product. Examples of Picture Symbols denotes that care should be taken. The example instructs the user to take care not to allow fingers to be trapped. [. . . ] (Refer to the PROGRAMMING MODE section of this manual. ) 4. DEMONSTRATION SONG The CN piano has 8 built in demonstration songs for your listening enjoyment. (1) Press the DEMO button and the demo for CLASSIC GRAND will start. When the CLASSIC GRAND demo is finished the CN piano will play all the other demos one at a time in random order. (2) If you would like to listen to the demo for a particular sound, just press the desired TONE button while the demo is playing. When you press the TONE button, the demo for that newly selected sound will be played. (3) To stop the demo, press the DEMO button again at any time. ­ 11 ­ DIGITAL RECORDING FUNCTIONS 1. EASY RECORDING (1) Press the REC button. The CN piano will be ready for recording. To cancel the recording, press the REC button again. (2) Begin playing some music on the piano. To cancel without recording, press the REC button again. Playing the piano will automatically start the recording. You can also start recording by pressing the PLAY/STOP button. (3) Press the PLAY/STOP button after you have finished recording. (4) Holding down the PLAY/STOP button, press the MODERN PIANO (Song 2) button. (5) Releasing both buttons will play Song No. 2. Playback will automatically stop when the song is finished. Before pressing the PLAY/STOP button, press the STRINGS button while holding down the TOUCH and TRANSPOSE buttons to make the tempo slower or press the CHOIR button while holding down the TOUCH and TRANSPOSE buttons to make the tempo faster. RECORDING/PLAYING BACK THE LEFT AND RIGHT HAND PARTS SEPARATELY The CN piano can record the parts played by the left or right hand and play back these parts separately or simultaneously. This function can be enjoyed in different ways. For example, you can practice the right-hand part of the song while playing back the recorded left-hand part, or record the melody part of the song while playing back the previously recorded accompaniment. (1) While holding down the REC button, press the E. PIANO (Song 3) button to select Song No. 3. [. . . ] (2) Release both hands after selecting either "on" or "off" for transmit MIDI program change. When the power is first turned on, the TRANSMIT MIDI PROGRAM CHANGE function is always "on". 5. TURNING MULTI-TIMBRAL MODE ON/OFF Normally, the procedure described in the MIDI CHANNEL SELECT section is used to transmit or receive data on only one MIDI channel (any one of 1 through 16). But by turning the MULTI TIMBRAL function "on", you can receive data on more than one MIDI channel and simultaneously play a different sound on each channel. [. . . ]