User manual KAWAI MAV-8

[. . . ] (If they are not fastened securely enough, the TV may tilt forward after being installed. ) Do not fasten the screws with too much force; otherwise they may be worn out and get loosened. Tidying cables Only 32/37/42LS57**, 65LM62**, 32/42/47LM669* 1 Gather and bind the cables with the Cable Holder. NOTE Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. [. . . ] It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. - Before starting, be sure that the TV antenna is connected. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. "Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)" When applying the RF Isolator, a slight loss of signal sensitivity can occur. ASSEMBLING AND PREPARING 15 Separate purchase Contact your dealer to buy these items. These devices only work with certain models. ENGLISH ENG P AG-F2**DP, AG-F3**DP Dual play glasses AG-F2**, AG-F3** Cinema 3D Glasses AN-MR300 Magic Remote Control AN-WF100 Wireless LAN 32/42/47/55/60LM64**, 32/42/47/55LM66**, 42/47/55LM67**, 42/47/55LM76** Compatibility AG-F2**DP, AG-F3**DP Dual play glasses AG-F2**, AG-F3** Cinema 3D Glasses AN-MR300 Magic Remote Control AN-WF100 Wireless LAN 32/37/42LS570* 32/37/42LS575* 32/37/42/47/ 55/65LM62** The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies. 16 ASSEMBLING AND PREPARING Parts and buttons A type : 32/42/47/55/60LM64**, 32/42/47/55LM66**, 42/47/55LM67**, 42/47/55LM76** B type : 32/37/42LS57**, 32/37/42/47/55/65LM62** ENGLISH ENG Screen Screen Remote control and intelligent sensors1 OK Power indicator SETTINGS Speakers Remote control and intelligent sensors1 Power indicator INPUT Speakers OK SETTINGS INPUT Buttons Touch buttons2 Button A type B type Description Scrolls through the saved programmes. SETTINGS Accesses the main menu, or saves your input and exits the menus. Once the TV is fixed, move the table close to the wall. WARNING To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. ASSEMBLING AND PREPARING 19 Adjusting the angle of the TV to suit view (This feature is not available for all models. ) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 32/37/42LS57**, 65LM62**, 32/42/47LM669*, 42/47/55LM765*) 20 20 Securing the TV to a wall (This feature is not available for all models. ) ENGLISH ENG Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 32/37/42/47/55LM62**, 32/42/47/55/60LM64**, 32/42/47/55LM660*, 42/47/55LM67**, 42/47/55LM760*, 42/47/55LM761*) 10 10 1 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. [. . . ] NOTE AUDIO menu items are disabled when connecting a headphone. When changing AV MODE with a headphone connected, the change is applied to video but not to audio. Optical Digital Audio Out is not available when connecting a headphone. AUDIO / VIDEO English Transmits the video and audio signals from an external device to the TV set. [. . . ]