User manual KAWAI XR9000

[. . . ] 6 Serviceability The one-piece fiberglass hood opens upward and rearward to allow access to the engine and daily maintenance points. Daily check points are accessible from ground level. Ground level service is also provided on the water spray system with pumps, filters, and drain valves grouped together and centrally located. Rear mounted cooling system with fresh air intake reduces the need for cleaning. [. . . ] The isolated operator's station with four heavy-duty rubber mounts limits machine vibration transmitted to the operator's station. Rubber floor mat provides sure footing and helps further isolate the operator from machine vibration and noise. Steering console and instrumentation gauges are infinitely adjustable within the tilt range to the desired position of the operator. Entire console tilts for simple entrance and exit. Machine gauges are located on the adjustable front steering column for easy reference during machine operation. The instrument panel contains the fuel gauge, vibrations per minute (VPM) meter (optional) and a nine-light LED fault indication panel. Gauges and controls move with console keeping them in same relative position to the operator. Fault indication panel is a three-level warning system to alert the operator to abnormal machine conditions with a visual warning and action alarm. The multifunction ergonomic propel handle simplifies operation with the following controls: propel speed, vibe on/off, water spray on/off, horn and drum offset (optional). Standard ASC control greatly simplifies operation by allowing the operator to preset machine speed or impact spacing. The operator can easily match travel speed with vibrations per minute, ensuring consistent and repeatable rolling patterns with effective compaction results. Water system pumps, filters and tank drain are centrally located at ground level for easy access. Can be obtained through your local Caterpillar dealer. Self-adjusting scrapers are designed for even wear without the need for maintenance. To reduce scraper wear, the scrapers are located for easy ground level access to replace the blades. Scrapers flip up while roading the machine. Remote mounted quick start post for easy jump starts. Removable side panels on the engine compartment allows easy access to hydraulic components. Vertical-lift hood arrangement allows routine service when parked close to other machines and structures. The ground level servicing simplifies routine maintenance with hydraulic components designed for easy access. Oil bath lubrication of eccentric weight bearings reduces routine maintenance to 3 year/3000 hour intervals. The automotive-type steering wheel and column are integral with the operator's swivel platform and allow steering from multiple positions. [. . . ] The system consists of two diaphragm pumps driven by electric motors. Only one pump operates at time, supplying pressurized water to both sets of drum spray bars. pump operation is controlled from operator's station. System provides complete back-up capability controlled from operator's station. [. . . ]