User manual KAZ HW-628

[. . . ] Do not place the fan or any parts near an open flame, cooking or other heating appliance. Do not operate the fan with a damaged cord or plug or if the product malfunctions, is dropped or damaged in any manner (see warranty). The use of attachments not recommended by the manufacturer may be hazardous. Do not hang or mount fan on a wall or ceiling. [. . . ] Choose a suitable mounting location on the window frame where the fan can be positioned to direct airflow through the open window. mark the location of the bracket with a pencil for placement. NOTE: Since the mounting bracket will remain attached to the window frame at the marked location, be sure that the bracket is positioned in a manner that will allow the window to be closed when the fan is removed. Using the wood screws provided in the hardware packet, mount the bracket into the frame at the marked location (Fig. The fan can be mounted onto the bracket within the window and is ready for use (Fig. In rare instances during CASEMENT window installation, your window screen may not fit in its original position. In that event, it may become necessary to use an "alternate bracket" will be provided free of charge. This alternate bracket will enable you to use your window screen in its original position. Plug the fan into a polarized 120 Volt AC wall outlet. Turn the Thermostat Control to its highest setting (fully clockwise). Set the fan to either the FRESH AIR or EXHAUST mode by moving the FRESH AIR/EXHAUST switch up or down (Fig. NOTE: Do not switch the fan from FRESH AIR to EXHAUST while the fan is on. Adjust the SPEED control of each fan to either SUPER, HIGH or LOW. When a comfortable room temperature has been reached, slowly turn the thermostat control COUNTER-CLOCKWISE until the fan stops. The thermostat will now turn the fan ON and OFF to maintain this comfort setting. The front air grilles can be manually rotated to change the direction of the air flow. cLEANING AND STORAGE · Turn fan off and unplug the fan before cleaning. The fan grilles are removable for cleaning by gently prying the grille from fan using a small screwdriver on the rim of the grille. Use only a soft, damp cloth to gently wipe the fan clean. DO NOT immerse the fan in water and never allow water to enter the motor housing. DO NOT use gasoline, paint thinner or other chemicals to clean the fan. For storage, clean the fan as instructed and store it in its original box. [. . . ] Defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective product may be returned to Honeywell. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual. Return defective product to Honeywell Consumer Products with a brief description of the problem. [. . . ]