User manual KAZ HWM-450

[. . . ] When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Always place this humidifier on a firm, flat and level surface. This humidifier may not work properly on an uneven surface. Do not place humidifier directly on wood furniture or other surfaces that could be damaged by water. CAUTION: To reduce the risk of severe burns, place this humidifier in an area where it is not accessible to children. [. . . ] To turn your humidifier OFF simply press the Power button again. Your unit has three output/moisture levels: HIGH: For fast humidifying MED: For everyday moisture control LOW: For minimum operation (ideal for nighttime use) · Push the Up button (+) to increase output level and push the Down button (-) to decrease output level. The LED's will illuminate to reflect which level you have selected (Fig. Continuous Mode: Your unit will run continuously at your selected output level until you shut it off or it runs out of water. Set your desired humidity anywhere between 35% and 55%. Push the Up button (+) to increase desired humidity and push the Down button (-) to decrease desired humidity. The LED's will illuminate to reflect which desired humidity level you have selected (Fig. For example: If you set your humidity at 40%, the 35% and 40% LED's will be illuminated. Once you have set your desired humidity, the unit will operate under this desired setting until the unit is turned off. When the desired room humidity has been reached the unit will automatically shut off. Your unit will turn back on when your room decreases beyond your set level. NOTE: Your room humidity can often fluctuate. It is normal for your unit to turn itself on and off throughout the day as it is monitoring your changing environment. To go back to Continuous Mode, turn your unit off and then back on and select your desired output setting (see Step 2). When the Refill/Clean indicator light is illuminated it implies your unit is out of water or you need to clean your humidifier (Fig. The humidifier will then resume to its previous settings. (illuminated) · If the water level is full, this implies it's time to clean your humidifier. Please turn off and unplug the unit and refer to the CLEANING section. NOTE: Do not press the Reset button until the Tank is refilled and reinstalled. NOTE: Your unit's performance will decrease if you do not clean your Heating Plate. You unit may continuously shut off and output will decrease. With the power OFF, plug the filled humidifier into a polarized 120V outlet. [. . . ] Follow the CLEANING instructions when the humidifier will not be used for at least one week or more, or at the end of the season. Dry the humidifier completely before storing. DO NOT store with water inside the Removable Tray, Base or Water Tank. Pack the unit in its original carton and store in a cool, dry location. [. . . ]