Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KAZ HY-013. We hope that this KAZ HY-013 user guide will be useful to you.
Lastmanuals help download the user guide KAZ HY-013.
Detailed instructions for use are in the User's Guide.
[. . . ] To disconnect the fan, first turn the unit OFF, grip the plug and pull it from the wall outlet. Do not place the fan or any parts near an open flame, cooking or other heating appliance. Do not operate the fan with a damaged cord or plug or if the product malfunctions, is dropped or damaged in any manner (see warranty). The use of attachments not recommended by the manufacturer may be hazardous. [. . . ] A phillips head screw driver ( ) is required for assembly and is not included with the fan purchase. Place the power cord through the center of the front and rear pedestal assemblies with the screw hole openings facing towards the fan. ⷠAlign the front and rear pedestal assembly and firmly snap together (Fig 7). Line up the 3 screw holes on the pedestal with the 3 screw holes on the bottom of the fan housing. Use the 3 (M5 x 12) screws included in the box and a phillips head screw driver ( to secure the pedestal to the fan housing (Fig. With the fan in the upside down position, pass the power cord through the recessed slot located in the center of the rear base assembly (Fig 9). ⷠAlign the rear and front base assembly and firmly snap together by pushing the 4 round extrusion into the adjacent circles of the connecting pieces (Fig 10). Align the 3 screw holes in the bottom of the pedestal with the 3 screw holes located on the base. Using the 3 (M5 x 12) screws and phillips head screw driver ( ), secure the base into the bottom portion of the fan housing (Fig 11). ⷠPlace the power cord through the cut out on the bottom of the base. Gently pull any slack out of the power cord and place the cord securely in the power cord holding bracket (Fig. Be sure your fan is in the OFF position by pressing the off button. ( ) · Place the fan on a level and dry surface. ⷠPlug the power cord into a polarized 120 Volt AC wall outlet. To turn on the fan after automatic shut-off, turn the knob counterclockwise to the ON position. ⷠTo turn the fan off press the Off button once. Use only a soft, damp cloth to gently wipe the outside surface of the fan. ⷠDO NOT immerse the fan in water and never allow water to drip into the motor housing. [. . . ] This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship. This warranty does not cover damage resulting from any unauthorized attempts to repair or from any use not in accordance with the instruction manual. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KAZ HY-013
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KAZ HY-013 will begin.
