User manual KAZ HZ-341

[. . . ] Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area where it will not be tripped over. This appliance has a polarized plug (one blade is wider than the other). Shock, this plug is intended to fit only one way in a polarized outlet. [. . . ] Always set the Desired Temperature prior to setting the Timer (see Step 2) so that the heater will shut off at the Desired Temperature setting and not run continuously. Use the Up and Down arrow buttons ( ) to set the heater operation time between 1 and 10 hours (Fig. Once the timer function is set the hour set will remain displayed until the time set runs out. â· The heater will automatically turn off when time runs out. This heater offers the option to read the temperature setting in either Fahrenheit or Celsius. Press the Oscillation button ( ) to toggle this feature on and off (Fig. When the SafeGuardTM Alert Badge located on the top of the grill changes from black to red the grill is hot to the touch. Do not touch the grille until the unit has been turned off and the SafeGuardTM Alert Badge has turned back to black. REMOTE CONTROL OPERATION (MODEL HZ-341 SERIES ONLY) Two (2) AAA batteries are included and are required to operate the Remote Control. The Remote Control can be stored on the heater when not in use by hanging the remote on the hook located on the side of the heater (See Fig. The Control Panel display on the heater will show the appropriate icons when the various functions are activated. If left at this setting, the unit will run continuously on High Power (1500 watts, 12. 5 amps) and will not shut off until the unit is manually turned off. If left at this setting, the unit will run continuously on Low Power (900 watts, 7. 5 amps) and will not shut off until the unit is manually turned off. â· Press the Power button ( ) a third time to turn the heater OFF. REMOTE CONTROL OPERATION (CONTINUED) NOTE: If operated at the Low setting, the heater will not provide as much heat output as in the High setting, however, the Low setting will not require as much electrical current to operate. To avoid overloading a circuit, do not plug the heater into a circuit that already has other appliances working. Press the Mode button until the Temperature Icon ( The current room temperature will appear (Fig. The Temperature Icon ( ) will stop blinking and the current room temperature will reappear after the Desired Temperature is set. â· The heater will turn off shortly after the Desired Temperature is reached and the Temperature Display will blink. â· The heater will turn back on when the room temperature drops below the Desired Temperature. [. . . ] This warranty applies only to the original purchaser of this product from the original date of purchase. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship. Defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective product may be returned to Kaz. [. . . ]