User manual KAZ HZ-3750

[. . . ] Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked. a heater has hot and arcing or sparking parts inside. [. . . ] Press the heat setting button ( ) once to change the heat setting from max power to energy saver mode ( ). In this setting the heater will operate at 900 watts and run continuously. Press the heat setting button a second time to change the heat setting back to max power (1500 watts), continuous run. To set the desired temperature, turn the temperature knob ( ), the temperature display will change from the current room temperature to display a default temperature of 75° F (23. The desired temperature can be set between 45° F (7. Once the desired temperature is set the current room temperature will appear. ⷠThe heater will turn off shortly after the Desired Temperature is reached and the Temperature Display will blink. ⷠThe heater will turn back on when the room temperature drops below the Desired Temperature. The Temperature Display will then stop blinking and will display the current room temperature. NOTE: This function should only be set if you desire that the heater be automatically shut off after a certain period of time (1, 2, 4, or 8 hours from the time the function is set). A light will illuminate next to the 1 hr icon. twice to set the timer for 2 hr auto shut-off. A light will illuminate next to the 2 hr icon. three times to set the timer for 4 hr auto-shut-off. A light will illuminate next to the 4 hr icon. four times to set the timer for 8 hr auto shut-off. A light will illuminate next to the 8 hr icon. ⷠThe heater will automatically turn off when time runs out. ) to toggle this feature on and off When the SafeGuardTM Alert Badge located on the front of the grille changes from black to red the grille is hot to the touch. Do not touch the grille until the unit has been turned off and the SafeGuardTM Alert Badge has turned back to black. This heater is equipped with safety technology (Fig 7). If an object is placed too close to the heater, a light will blink warning you there is an obstruction. [. . . ] This warranty applies only to the original purchaser of this product from the original date of purchase. At its option, Kaz will repair or replace this product if it is found to be defective in material or workmanship. Defective product should be returned to the place of purchase in accordance with store policy. Thereafter, while within the warranty period defective product may be returned to Kaz. [. . . ]