User manual KB ELECTRONICS SI-4X

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KB ELECTRONICS SI-4X. We hope that this KB ELECTRONICS SI-4X user guide will be useful to you.

Lastmanuals help download the user guide KB ELECTRONICS SI-4X.

Download

Manual abstract: user guide KB ELECTRONICS SI-4X

Detailed instructions for use are in the User's Guide.

 [. . . ] Note: To activate the tach feature,  set Jumper J2,  on the KBMMTM,  to the "T" position. Figure 12A - Jumper Connection Figure 12B Tach-Generator Connection on SI-6

¢ £¡ 

¤¥ ¢ £¡ 

¡¦

©

©

©

!

%

©

¡

'

§¨

§

§

§

§

&

§

§

&

The following information pertains to page 11 of the SI-4X/SI-6 Installation and Operation Manual Rev.  [. . . ] Figure 12A - Jumper Connection Figure 12B Tach-Generator Connection on SI-6

¢ £¡ 

¤¥ ¢ £¡ 

¡¦

©

©

©

!

%

©

¡

'

§¨

§

§

§

§

&

§

§

&

The following information pertains to page 11 of the SI-4X/SI-6 Installation and Operation Manual Rev. Disconnect main power when making connections to the SI-6 or KBMMTM. 

Description of Changes Tach-generator feedback formula is corrected to include the subtraction symbol which was missing. Note above Figures 12A and 12B is changed. Figure 12A is updated to show new terminals and their orientation. Figure 12B is corrected to show the tach-generator connection to Terminals "I1" and "F-" on SI-6. 

Application Note: Be sure to connect the gray wire to Terminal "I1" on the SI-6 and to Terminal "T" on the KBMMTM. Note above Figures 12A and 12B is changed. Figure 12A is updated to show new terminals and their orientation. Figure 12B is corrected to show the tach-generator connection to Terminals "I1" and "F-" on SI-6. 

Application Note: Be sure to connect the gray wire to Terminal "I1" on the SI-6 and to Terminal "T" on the KBMMTM. Do not connect the tach-generator to Terminals "COM" and "I1". 
IV. Before applying power,  be sure the AC line input voltage,  120 or 240 Volts AC,  corresponds to the speed control rated voltage and proper J2A and J2B jumper setting of the SI-4X or SI-6.  [. . . ] Figure 12B is corrected to show the tach-generator connection to Terminals "I1" and "F-" on SI-6. 

Application Note: Be sure to connect the gray wire to Terminal "I1" on the SI-6 and to Terminal "T" on the KBMMTM. Do not connect the tach-generator to Terminals "COM" and "I1". 
IV.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KB ELECTRONICS SI-4X

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KB ELECTRONICS SI-4X will begin.