User manual KENMORE VACUUM CLEANER 116-28095C

[. . . ] - The motor only starts if the blender jar attachment has been correctly assembled onto the motor unit. - Make sure the blade unit is securely fastened onto the blender jar before you screw the attachment onto the motor unit. - Never touch the blade unit when it is assembled on the appliance and the appliance is plugged in. - Avoid touching the cutting edges of the blade units when cleaning them. [. . . ] Do not let the appliance run for more than 3 minutes at a time. If you have not finished processing after 3 minutes, switch the appliance off for one minute before you let it run again. 4 Press the pulse button (M) if you want to process ingredients very briefly. 9) You can also press the pulse button (M) to obtain a temporary power burst while the blender is running at speed 1, 2 or 3. Once your release the pulse button the blender automatically stops running. Never press the pulse button (M) longer than a few seconds at a time. 5 Press the off button (0) to switch the appliance off when it is running at speed 1, 2 or 3. 10) Tips To avoid spillage, never fill the jar above the maximum level indication (1. If you are blending hot liquids, do not fill the jar beyond the 1. If you are blending foaming liquids, never fill the jar beyond the 1. The opening in the lid can be used for adding ingredients while the motor is running. Start processing a small quantity, let the appliance run for a moment, switch it off and then add another small quantity. But do not exceed the above mentioned quantities! For making soy milk: Soak dried soy beans for 4 hours before processing them. 300ml water (or another liquid if you are making e. Cleaning of the appliance, its parts and the accessories is easiest immediately after use. Never clean the accessories or parts of the appliance in the dishwasher. do not use abrasives , scourers , alcohol , etc. Always unplug the appliance before cleaning it. After cleaning the parts and/or accessories, rinse them with clean water and dry them thoroughly. Clean the motor unit with a moist cloth. Never immerse the motor unit in water nor rinse it under the tap Blender jar Never clean the glass jar with water hotter than 160cF/80cC. [. . . ] This chapter summarises the most common problems you could encounter. Please read the different sections for more details. If you are unable to solve the problem, please contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or the nearest Philips service centre. [. . . ]