User manual KENWOOD CAW-HY1231

[. . . ] . 6 Switching to the Angle/Screen Control Screen . . 6 Switching to the Source Control Screen . . 6 Changing the Background of the Source Control Screen Picture . . 6 Angle Control Screen Adjusting the Angle Position . [. . . ] Manual Tuning (MANU) Touch [ ¢ ] to increase the channel by one step. Touch [ 4 ] to decrease the channel by one step. 3 Station Preset Memory Store the channel of the station currently being listened to. You can then recall that station with a single touch of a button. 1 Select the band/ station that you want to store. 2 Hold down preset station number [ P1 ] - [ P6 ] on which you want to store the station, for two seconds or more. NOTE You can store 6 stations in each of the TV1 and TV2 bands. 3 Recalling a Preset Station Touch the preset station number [ P1 ] - [ P6 ] for the desired station. The number of the recalled station is displayed. 15 TV Control Function English TV Control Screen (Shift) TI VD ME NU TV 1 2:0 0 TV 12ch 3 Selecting the Tuning Mode You can choose from three tuning modes: auto seek, preset station seek, and manual. The "AUTO1" indicator is displayed when auto seek tuning is selected, and the "AUTO2" indicator is displayed when preset station seek tuning is selected. Each time you touch [ SEEK ], the mode switches as follows: w TV1 A1 P1 NO N AME MANU AUTO 1 w (Auto Seek Tuning) (Preset Station Seek Tuning) (Manual Tuning) AME SEEK LIST NAME AUTO 2 w 3 Auto Memory Entry You can automatically store all the receivable channels in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to 6 stations can be stored this way. MANU 3 Switching to the TV List Screen Touch [ LIST ] to switch to the TV list screen. 3 Switching to the Name Set Screen Touch [ NAME ] to switch to the name set screen (Page 27). NOTE 1 Select the band for auto memory entry. 2 Touch [ AME ]. [ ¢ ] and [ 4 ] blink. You cannot operate unless the parking brake is set. 3 Touch [ ¢ ] or [ 4 ] to start auto memory entry. The preset station numbers [ P1 ] - [ P6 ] are shown in order. When all the stations on a certain band have been stored in the preset memory, the auto memory entry stops. 2 Touch [ AME ]. [ ¢ ] and [ 4 ] blink. 3 Touch [ ¢ ] or [ 4 ] to start auto memory entry. The preset station numbers [ P1 ] - [ P6 ] are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received. NOTE · When the AF function is turned on whilst auto memory entry takes place, only RDS stations (i. e. , stations with RDS capability) are stored. RDS stations that have been preset for FM1 cannot also be preset in FM2 or FM3. · When the local seek function is turned whilst auto memory entry takes place, stations with poor reception are not stored. · When the Traffic Information function is on, only the local traffic information station frequency will be stored. 3Turning the Monaural Reception On/Off When poor stereo reception is experienced, this function will reduce noise and improve listening conditions. Touch [ MONO ] to switch the monaural reception on and off. The MONO indicator is displayed when monaural reception is on. 19 FM/AM Tuner Control Function English Tuner Control Screen (Shift) 3 Traffic Information Function You can listen to traffic information. If you are listening to discs, they will continue playing until a traffic bulletin is broadcast. Turning TI function On/Off: Touch [ TI ] on the control screen to turn the function on and off. When the function is on, the TI indicator is turned on. When a traffic information station is received, the TI indicator blinks. [. . . ] Make proper connections according to "Connections" (See page 31). · Separate the two antennas as far as possible. · Turn off the main unit. No ACC position on vehicle ignition. Nothing happens when the buttons are pressed. [. . . ]