User manual KENWOOD CAW-KI2520

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only China and Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V only *Other countries . . . . . . . . . . . AC 110-120 / 220-240 V switchable *AC voltage selection The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. [. . . ] ÷ Remove tape slack before loading. 2. Select the tape transport direction. To reverse the transport direction ¡ # & # ¡ 2 REV. MODE DOLBY NR 1 Select deck B by pressing the A/B key. 2 Press the play key corresponding to the desired direction. 3 Stop playback (by pressing the & key). ÷ When recording is started, the tape is transported in the direction selected in this step. ÷ Wind the tape to the position where recording is to be started. Check the tape transport direction indicator. Set the recording condition. 1 Select the reverse mode. (XD-5. . . series only) 3 ª ª ÷ The Tape Equalizer cannot be used in recording. (XD-4. . . series only) Let's record 29 XD-SERIES (En) To pause recording (Main unit only) Lights Selection of DOLBY NR (Noise Reduction) (Main unit only) (XD-5. . . . series only) The DOLBY NR system minimizes the hiss noise heard when playing tape. When playing a tape prerecorded with DOLBY NR ON, be sure to set the DOLBY NR ON for playback. Lit when "DOLBY NR" is ON. REC/ARM XD-5. . . . series XD-4. . . . series ÷ Pressing the key pauses recording after leaving a non-recorded space of about 4 seconds. ÷ If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. DOLBY NR Selection of the reverse mode (Main unit only) REV. MODE B 4 Select "Tape Dubbing". MENU ULTI M deck CONTR OL 6 Start dubbing. SELECT +Scrolled display (Press 'ENTER' to Start) Press The following items can be selected by turning the MULTI CONTROL jog dial. "Recording Options" "Tape Dubbing" "Audio Options" "Clock Options" +Scrolled display (Tape Dubbing) Lights 'ENT ENTER ÷ Dubbing ends automatically when the side(s) to be dubbed has been completed. To stop dubbing REC/ARM Tape Dubbi The DOLBY NR or TAPE EQ. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on deck A. ÷ The deck B will stop after creating a non-recorded portion of about 4 sec, and then the deck A will stop. ÷ Dubbing can also be stopped by pressing the stop (&) key of the cassette deck unit. Note that the nonrecorded space is not created in this case. 32 Playback of CD XD-SERIES (En) Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. 32 titles) Select the "CD" input. Check that 1 stop mode. the CD player is in the If it is in play mode & ^ ÷ If the operation in step 2 is performed during playback of a track, the current track can be programmed as the first track in the program. 2 Select "CD Program Play". MENU ULTI M CONTR OL SELECT The following items can be selected by turning the MULTI CONTROL jog dial. "CD Program Play" ("Recording Options") "Audio Options" "Clock Options" +Scrolled display (CD Program Play) Lights CD Program Enter track No. s in 3 want to play them. the order you 1 Select the disc. ULTI M CONTR OL +Scrolled display (Select Disc/Track No. ) Lights Select SELECT Dis Application section P01 2 Select the track. ULTI M D1 T?? CONTR OL P01 SELECT D1 T01 (To select other tracks, repeat steps 1 and 2 for each of the additional tracks. ) ÷ Even if you program a disc or track which does not exit in the tray, it is deleted automatically in playback. ÷ Press the BACK key to return to the previous step and restart operation from there. ÷ Up to 32 tracks can be programmed. [. . . ] 160 mm, cone type Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mm, cone type Super-tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm, dome type Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Maximum input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]