User manual KENWOOD CAW-PS2013

[. . . ] Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory Next page 3 The above operation example with the mark differs from the actual operation. 4 CAW-PS2013/CAW-PS2013Y/KVT-50DVDRY English 5 Before Use 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. [. . . ] Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc. ) of Phonebook data, a key word voice must be registered. See <Key Word Voice Registration> (page 54). If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number. Make a call. / · If there are more than one phone numbers registered under the same name, and the key word voice is registered for each phone number, you will hear another beep. For how to register key word, see <Key Word Voice Registration> (page 54). 1 Display the Voice Recognition screen If there are more than one phone numbers registered under the same name, go to step 3. 3 Select a Phone number category 4 6 7 2 Utter the voice registered in the PhoneBook 1 2 5 8 Utter within 2 seconds after the Beep. 1 Displays the recognized phone number or address. 2 Cancels voice recognition. 4 Calls the displayed phone number. 5 Creates an SMS to the displayed address. See <SMS (Short Message Service)> (page 56). 4 Make a call If the voice recognition is succeeded and there is only one phone number found: / · A message is displayed if the voice is not recognized. Read the message for the further operation. 3 Make a call. 3 Displays the phonebook list. 52 CAW-PS2013/CAW-PS2013Y/KVT-50DVDRY Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. · Repeat from 1st try if the voice is different from the 1st try. 1 Selects a name. "REC" turns on for data with voice for voice recognition already registered. 2 Display the voice registration screen Key Word Voice Registration Registers the voice to select the Phone number category by Voice Recognition. 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 47). 3 Utter the voice to register (1st try) 3 2 2 Registers the voice. 3 Cancels voice registration. 2 Select the Phone number category to register 1 2 3 Utter within 2 seconds after the Beep. 4 Utter the voice to register (2nd try) 4 5 1 Selects the Phone number category. "REC" turns on for data with voice for voice recognition already registered. 2 Registers voice for the selected Phone number category. 54 CAW-PS2013/CAW-PS2013Y/KVT-50DVDRY 3 Plays voice registered for the selected Phone number category. 4 Deletes voice registered for the selected Phone number category. [. . . ] At such times this message will appear. Use when the temperature at the site where the disc changer has been fitted has dropped. Mecha Error : The disc player is malfunctioning. Check the USB device. Some trouble may have occurred to the connected USB device. Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error : Change the source to any source other than USB. Remove the USB device. Authorization Error: Connection to the iPod has failed. Remove the iPod and then reconnect it. The unit does not support the iPod. An unplayable disc is inserted. Read Error : Disc is quite dirty. See <iPod that can be connected to this unit> (page 7). Update your iPod: The iPod's software is an older version which the unit can not support. Clean the disc, referring tot he section on <Handling discs> (page 6). Disc is upside down. Load the disc with the labeled side up. Region code Error : The disc you wanted to play has a region code that cannot be played with this unit. Parental level Error: The disc you wanted to play has a higher level than the parental level you set. Confirm that the software for the iPod is the latest version. [. . . ]