User manual KENWOOD CAW-RN1310

[. . . ] · Some setting is required to display the following language characters. Set "TAG Language Select" of <Initial Settings> (page 24). - English (ISO 8859-1) - Chinese (GB13000. 1) - Arabic (Windows CP1256) - Persian (Windows CP1256) - Thai (Windows CP874) Do not use this unit before canceling Demonstration mode This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit of the Demonstration Mode> (page 5). · The demonstration is an operation image. [. . . ] Exit Audio Control mode Press the [MENU] button for at least 1 second. 4 2 Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Press the [Volume] knob for at least 1 second if you want to execute the "INITIAL". Exit Audio Control mode Press the [MENU] button for at least 1 second. 3 4 5 5 6 / Select Main source by [SRC] button. Adjust the volume of Front channel by [Volume] knob. The Audio Control has no effect on sub source. "USB", "iPod" and "Int. Mem. " (Internal memory) cannot be set at the same time for the main and sub sources. · There are following limitations when Dual Zone System is enabled. - There is no output from the subwoofer. - "Fader", "Subwoofer Level" of <Audio Control> (page 26) and DSP function are not available. · The Bluetooth audio source can be set exclusively to the front speaker. Set "2Zone Front/Rear" to "Rear". 1 Set the front and rear positions and the height of the reference point to the position of the ears of the person sitting in the front seat, and set the right and left positions to the center of the vehicle interior. 2 Measure the distances from the reference point to the speakers. 3 Calculate the distance difference in accordance with the farthest speaker. Reference point 3 4 1 2 Enter Audio Control mode Press the [Volume] knob. Enter X'Over setting mode Turn the [Volume] knob and press it when the desired item is displayed. Select "Detailed Setup" > "X'Over". Select the speaker you want to set Turn the [Volume] knob and press it when the desired item is displayed. Select "Front", "Rear", or "Subwoofer". Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. Repeat steps 3 to 5 to complete the X'Over settings Exit Audio Control mode Press the [MENU] button for at least 1 second. 3 4 FRONT FRONT 5 REAR REAR 6 7 SUB-W 30 | CAW-RN1310 Audio Preset Memory Registering the value setup by Sound Control. Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 31). 1 Setup Sound Control Refer to the following operations to setup the Sound Control. - Car Type Selection (page 29) - Speaker Setting (page 29) - Car Type Fine Adjustments (page 30) - X'Over Setting (page 30) - Manual Equalizer Control (page 27) - Listening Position Selection (page 27) - Listening Position Fine Adjustments (page 28) Enter Audio preset memory mode Turn the [Volume] knob and press it when the desired item is displayed. [. . . ] 5 Bluetooth device have already been registered. No more Bluetooth device cannot be registered. The unit cannot be connected to the device. Pairing error. HF Error 68: iPod Error: Un Known: Device Full: USB REMOVE (Blink): The Remove mode has been selected for the USB device/iPod. [. . . ]