User manual KENWOOD CAW-RV7040

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only China and Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V only *Other countries . . . . . . . . . . . AC 110-120 / 220-240 V switchable *AC voltage selection The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. [. . . ] ÷ When "Display Auto" is selected, the display mode during CD playback changes to "Display 1", "Display 2" and "Display 3" every time the track changes. DISPLAY /DEMO Let's record 35 XD-SERIES (EN/M, T) Copying tape (Tape dubbing) The contents of the tape in deck A can be copied onto the tape in deck B. Load tapes in the decks. Playing tape A A 5 Use the same tape transport directions. ÷ When recording is started, the tape will be transported in the direction selected in this step. ( > :side A, < : side B) Recording tape (1) Select the transport direction of deck A. 1 Select the "TAPE" input. INPUT ULTI M CONTR OL +Scrolled display (Deck A Play Direction) Deck 2 Press the stop key. ¡ SELECT A Pla > # & # ¡ A deck 3 Select " " (double-side recording) or " " (one-side recording). MODE (2) Select the transport direction of deck B. ULTI M CONTR OL +Scrolled display (Deck B Record Direction) 4 Select "Tape Dubbing". SELECT ULTI M Deck B SELECT B Rec > Basic section MENU CONTR OL deck 6 Start dubbing. The following items can be selected by turning the MULTI CONTROL jog dial. "Recording Options" "Tape Dubbing" "Audio Options" "Clock Options" "Surround Setup" (Except for XD-7. . . series) +Scrolled display (Tape Dubbing) Lights +Scrolled display (Press 'ENTER' to Start) Press 'ENT ENTER ÷ Dubbing ends automatically when the side(s) to be dubbed has been completed. Tape Dubbi XD-6. . . series, XD-8. . . series : ÷ "Tape Dubbing" cannot be selected during DSP or surround playback. In these modes, select another E equalizer pattern and retry. To stop dubbing REC/ARM The DOLBY NR or TAPE EQ. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on deck A. ÷ The deck B will stop after creating a non-recorded portion of about 4 sec, and then the deck A will stop. ÷ Dubbing can also be stopped by pressing the stop (&) key of the cassette deck unit. Note that the nonrecorded space is not created in this case. 36 Playback of CD XD-SERIES (EN/M, T) Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. 32 titles) Select the "CD" input. Check that 1 stop mode. 1 "One Disc Random" Random play of one disc 2 "All Disc Random" Random play of all discs 3 "Random off" (Normal playback) Random play of one disc +Scrolled display (One Disc Random) To select another track in the middle of playing one One XD-6. . . series XD-8. . . series XD-7. . . series 4 4 2 MULTI CONTROL Disc R D RNDM T15 ¢ Random play of all discs +Scrolled display (All Disc Random) ¢ 3 All Disc R A RNDM T12 Application section ÷ Pressing the 4 key once returns to the beginning of the track being played. ÷ Playback stops after each title has been played once. ÷ When the TIME key of the remote control unit is pressed during playback, the time display appears but it soon returns to the original display. To repeat random playback Select "Random Repeat". (Remote control unit only) REPEAT To cancel random playback Select "Random off". (Remote control unit only) RANDOM Each press switches the modes as follows. Random repeat mode 2 "Repeat off" . . . . . . . . . . . . . . (Radio Data System) (For U. K. , Europe and Russia) RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. 41 XD-SERIES (EN/M, T) This unit is equipped with the following functions utilizing RDS data: PTY (Program Type Identification) Search :w The tuner automatically searches for a station which is currently broadcasting a specified program type (genre). The "RDS" indicator lights up when an RDS broadcast (signal) is received. RDS TP PTY EON TA PS (Program Service Name) Display : (See below. ) When an RDS broadcast is received, the station name is automatically displayed. EON (Enhanced Other Network) : r NEWS When the information to be received is set in advance and any RDS station in the same network starts broadcasting of such information, the reception automatically will be switched to that station. ÷ Some functions may not be provided or be given different names depending on countries or areas. Note before the use of RDS For reception of RDS stations, the auto presetting function must be used to preset the stations. With the auto presetting function, RDS stations are preset with priority. Set the receiving band to FM and preset RDS stations with the auto preset function. / Application section To switch the display contents Pressing the RDS DISP. key changes the display contents. (Remote control unit only) RDS DISP. Display mode priority ranking When an RDS broadcast is received : 1PS (Program Service Name) Display : When an RDS broadcast is received, the station name is automatically displayed. If no PS data was sent, "NO PS" is displayed. BBC 2Frequency Display : The frequency of the current station is displayed. 01FM102. 50 42 R. D. S. XD-SERIES (EN/M, T) Searching for a desired program type (PTY search) By specifying the type of program (genre) you want to listen to, the tuner automatically searches for a station which is currently broadcasting a program of the specified type. Set the reception band to FM. Preset RDS stations with the auto preset function. / 1 Select the PTY search mode. (Remote control unit only) PTY NEWS102. 50 RDS TP PTY EON TA NEWS 2 Select the desired program type. Use program type table on the right for your convenience. When an RDS broadcast is received, the program type is shown on the display. If no PTY data is available, or if the station is not an RDS station, "NONE" is displayed. A To select using the 4 ¢ keys XD-6. . . series XD-8. . . series 4 4 2 MULTI CONTROL Program type table XD-7. . . series ¢ ¢ 3 Program Type A B Name 4 ¢ keys 01 Pop Music 02 Rock Music Easy Listening 03 Music 04 Light classical 05 Serious classical 06 Other Music 07 News 08 Current Affairs 09 Information 00 Sport 10 Education 11 Drama 12 Culture 13 Science 14 Varied 15 Weather 16 Finance 17 Children's program 18 Social Affairs 19 Religion 20 Phone In 21 Travel 22 Leisure 23 Jazz Music 24 Conutry Music 25 National Music 26 Oldies Music 27 Folk Music 28 Documentary Display POP M ROCK M EASY M LIGHT M CLASSICS OTHER M NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT Select while "PTY" indicator lights up. Application section The 4 ¢ keys can be used to select one of the 29 program types by displaying them in sequence. [. . . ] W : 220 mm H : 330 mm D : 284 mm Weight (net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. 0 kg (1 piece) Fronts speakers (LS-N572) (XD-8. . . series) Enclosure . . . . . . . . . . . . . Bass-reflex type (magnetically shielded) Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mm, cone type Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]