User manual KENWOOD CD-206

[. . . ] CD PLAYER CD/DPF-R SERIES CD-206 CD-204 CD-203 DPF-R6010 DPF-R4010 DPF-R3010 INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used for six models. Model availability and features (functions) may differ depending on the country and sales area. DTS disclaimer clause When Playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo outputs. The consumer should take proper precautions when the analog stereo outputs of the CD player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5. 1 channel DTS Digital Surround decoder system must be connected to the digital output (S/PDIF, ASE/EBU, or TosLink) of the CD player. B60-3684-00 CH ( K, P, Y, M , X , T ) I D 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1 Introduction CD-206/204/203/DPF-R6010/R4010/R3010 (En) 2 Before applying power Units are designed for operation as follows. [. . . ] ÷ In the case of a non-CD-TEXT disc, the "NO CD TEXT" display will appear for approx. 3 seconds. Programmed play (PGM mode) CD-206/204/203/DPF-R6010/R4010/R3010 (En) 14 Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) Preparation Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. ÷ Load a disc in the CD player. REMOTE CONTROL UNIT RC-P0601 : Keys and controls used in the operations described on this page. 1 Press so that the "PGM" indicator lights. Do this operation in the stop mode. P. MODE CD-206/DPF-R6010 Blinks. PGM01 DISC? CD-204/203/DPF-R4010/R3010 Light up. PGM 2 1 2 3 4 5 Program desired tracks. 1 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 P GM 0 1 D 1 T NO. ?? In the case of a CD-TEXT disc, the disc title is scrolled on the display. (CD-206/ DPF-R6010 only) Press the numeric keys as shown below. . . . 25 : 005 Go to step 2 within 8 seconds. CD-206/DPF-R6010 P GM 0 1 D 1 T NO. 25 2 Select the desired track No. Main unit 4 ¢ 4 5 6 « 3 Remote control unit 1 2 PGM01 ABCDEFGH In the case of a CD-TEXT disc, the track's title is scrolled on the display. 7 8 9 0 +10 P GM 0 1 D 1 T NO. 25 CD-204/203/DPF-R4010/R3010 PGM DISC NO. REPEAT TRACK NO. Go to step 3 within 8 seconds. 5 3 Set the entry. 1 2 3 4 5 P. MODE 1 25 P_ 01 Track number 4 Repeat steps 1, 2 and 3 above. ÷ Tracks can also be selected by pressing the 4 or ¢ key. ÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no more tracks can be programmed. ÷ If you make a mistake, press the CLEAR key and enter the track No. from the beginning. 3 Start playback. 6 ÷ When the 4 or ¢ key is pressed during playback, the track will be skipped in the direction of the pressed button. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played. Programmed play (PGM mode) CD-206/204/203/DPF-R6010/R4010/R3010 (En) To stop playback 7 15 ÷ The programmed contents remain in memory. To check or change the programmed tracks 1 Press the CHECK key. CD-206/DPF-R6010 CD-206/DPF-R6010 Blinks. P GM 0 1 D 5 T NO. 25 CHECK REMOTE CONTROL UNIT RC-P0601 Press until the track No. to be changed is displayed. CD-204/203/DPF-R4010/R3010 Light up CD-204/203/DPF-R4010/R3010 CHECK DISC NO. REPEAT TRACK NO. P. C. 7 Press until the track No. to be changed is displayed. 5 25 P_ 01 2 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 ÷ Perform only step 1 to simply check the program. ÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display. (CD-206/DPF-R6010 only) ÷ Each time the key is pressed, the program No. on CD are displayed. 3 Select the new track No. Main unit 4 ¢ 4 5 6 Remote control unit 1 2 3 7 8 9 ÷ Press it while the "PGM 01" indicator blinks. (CD-206/DPF-R6010 only) ÷ Press the key while the "P. C. " indicator is lit. (CD-204/203/DPF-R4010/ R3010 only) ÷ The track being played cannot be changed. Example 0 +10 4 Set the entry. P. MODE To add a track to the program 1 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 2 Select the desired track No. Main unit 4 ¢ 4 5 6 Remote control unit 1 2 3 ÷ When a track No. [. . . ] 8 fs (352. 8 kHz) [ Audio ] Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz ­ 20 kHz, ±0. 5 dB Signal to noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 95 dB Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 95 dB Total harmonic distortion + noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]