User manual KENWOOD CD-403

[. . . ] CD PLAYER DPF-R 6030 DPF-R 4030 DPF-R 3030 KENWOOD CORPORATION CD-406 CD-404 CD-403 INSTRUCTION MANUAL This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. DTS disclaimer clause When playing DTS-encoded CDs, excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper pre-cautions when the analog stereo outputs of the CD player is connected to an amplification system. To enjoy DTS Digital SurroundTM playback, an external 5. 1 channel DTS Digital SurroundTM decoder system must be connected to the digital output (S/PDIF, AES/EBU, or TosLink) of the CD player. COMPACT COMPACT DIGITAL AUDIO DIGITAL AUDIO TEXT B60-4404-01 (EN) TEXT Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. 2 U. S. A. [. . . ] This type of display movement is known as "scrolling display. " Display example | Scroll display Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) 13 Preparation ÷ Load a disc in the CD player. 1 Press so that the "PGM" indicator lights. Do this operation in the stop mode. P. MODE CD-406/DPF-R6030 Blinks. CD-404/403/DPF-R4030/R3030 Light up. PGM FILE RANDOM AUTO PAUSE MULTI EDIT A B 2 1 2 3 4 5 Program desired tracks. 1 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 CD-406/DPF-R6030 Go to step 2 within 8 seconds. Press the numeric keys as shown below. . . . 25 : +10, +10, 5 2 Select the desired track No. Main unit Remote control unit 1 2 3 CD-404/403/DPF-R4030/R3030 4 5 6 PGM FILE RANDOM AUTO PAUSE MULTI EDIT A B DISC NO. SINGLE TOTAL P. C. ALL 0 1 6 11 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 7 8 9 1 2 3 4 5 16 0 +10 Track number Go to step 3 within 8 seconds. 3 Set the entry. P. MODE ÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no more tracks can be programmed. ÷ If you make a mistake, press the CLEAR key and enter the track No. from the beginning. 4 Repeat steps 1, 2 and 3 above. 3 Start playback. ÷ When the 4 or ¢ key is pressed during playback, the track will be skipped in the direction of the pressed button. Programmed play (PGM mode) To stop playback 14 ÷ The programmed contents remain in memory. To check or change the programmed tracks 1 Press the CHECK key. CHECK CD-406/DPF-R6030 Blinks. Press until the track No. to be changed is displayed. 2 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 CD-404/403/DPF-R4030/R3030 Light up DISC NO. SINGLE TOTAL P. C. ALL 0 1 6 11 16 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 3 Select the new track No. Main unit Remote control unit 1 2 3 ÷ Perform only step 1 to simply check the program. ÷ Each time the key is pressed, the program No. on CD are displayed. 4 5 6 7 8 9 0 +10 ÷ Press it while the "PGM 01" indicator blinks. (CD-406/DPF-R6030 only) ÷ Press the key while the "P. C. " indicator is lit. (CD-404/403/DPF-R4030/ R3030 only) ÷ The track being played cannot be changed. Example 4 Set the entry. P. MODE To add a track to the program 1 Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 2 Select the desired track No. 1 POWER DISC SELECTOR 1 1 2 3 2 3 ÷ When a track No. is selected, the track will be added to the end of the existing program. 2 4 5 6 3 7 8 9 4 5 6 4 P. MODE 0 +10 5 EDIT CLEAR CHECK SKIP TIME DISP. REPEAT RANDOM OUTPUT DOWN UP 7 8 9 REMOTE CONTROL UNIT RC-P0601 0 +10 3 Press the P. MODE key. P. MODE Programmed play (PGM mode) To clear tracks from the program Press to clear tracks from the end. CLEAR 15 ÷ Each time the key is pressed, the last track in the program is cleared. ÷ The tracks which are programmed earlier than the track being played cannot be cleared. To clear all tracks P. MODE ÷ Selected tracks can be also completely cleared just by operating the OPEN/CLOSE (0) key. ÷ The entire program is cleared. Auto space function During programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By recording tracks with these spaces on tape, the search and repeat play operations of tape using the DPSS function (which works by searching the non-recorded spaces) can be performed reliably. ÷ Even when the performances of two tracks are continuous (which occurs with classical or live recording music), the spaces will be created if they have different track Nos. Playback in a random order (Random playback) 16 As tracks are selected at random, you can enjoy listening to for a long time. Preparation TM ÷ Load a disc in the CD player. 1 Check that the unit is in the TRACK mode. !2 Press the RANDOM key. RANDOM CD-406/DPF-R6030 The number here changes. In case track No. 5 is selected CD-404/403/DPF-R4030/R3030 Blinks PGM FILE RANDOM AUTO PAUSE MULTI EDIT A B DISC NO. SINGLE TOTAL P. C. ALL 0 1 6 11 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 1 2 3 4 5 16 PGM FILE RANDOM AUTO PAUSE MULTI EDIT A B DISC NO. REPEAT TRACK NO. SINGLE TOTAL P. C. ALL 0 1 6 11 2 7 12 17 3 8 13 18 4 9 14 19 5 10 15 20 1 2 3 4 5 16 ÷ Each time a track ends, the same operation as above is repeated, and the track selected next is played. ÷ Random play stops after all of the tunes have been played once. [. . . ] Class 1 (IEC) [ General ] Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 W Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W : 440 mm (17-5/16") H : 124. 5 mm (4-15/16") D : 398 mm(15-5/8") Weight (Net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. 1 kg (11. 2 lb) DPF-R4030/3030 / CD-404/403 [ Format ] System . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]