User manual KENWOOD CS-7070ES

[. . . ] Refer to these model and serial numbers whenever you call upon your KENWOOD dealer for information or service on this product. Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. contact your local authority for details in locating a recycle facility nearest to you. [. . . ] Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Place the left and right speakers at each side of your TV. Angle the speakers towards the listening area to enhance the stereo effect. ⷠPlace the center speaker on the center between the front left and right speakers. The subwoofer's deep-bass reproduction characteristics are richest when the subwoofer is installed in a corner or near a wall. ⷠPlace the surround speakers straight to or diagonally behind the left and right of the listening position. ⷠPlace the surround back speaker behind the listining position, at the same height as the left and right surround speakers. Caution: Read this item carefully to keep your safety. Suffocation ­ After taking the unit out of the polyethylene bag, be sure to dispose of the polyethylene bag out of the reach of children. Otherwise, they may play with the bag, which could cause hazard of suffocation. 1 Screw two screws into the walls 270 mm (10-5/8 inches) apart, making sure that screws are horizontally level. Screw each screw only part way in, so that the screw projects 9 to 11 mm (3/8 to 7/16 inches) outward from the wall surface. ⷠWall screws must be purchased separately. Attach each couple of provided cushions to make two sets of two-cushion piles, and attach them to the two positions shown on the rear of the speaker. These piles will protect the speaker body from damage and prevent the vibrations of the speaker body from being transmitted to the wall. Please observe the following precautions when mounting speaker onto the wall. ⷠBe sure that the wall you are using is strong enough to support the full weight of the speaker (approx. Wall screws must be purchased separately. ⷠBe sure to use screws that are appropriate for the wall you are using, and that are long enough to provide sufficient strength. ⷠIf you are uncertain about the wall's support strength, the type of screw to use, or any other points regarding this type of installation, please consult a contractor or other qualified person before proceeding. [. . . ] ⷠBe sure to use screws that are appropriate for the wall you are using, and that are long enough to provide sufficient strength. ⷠIf you are uncertain about the wall's support strength, the type of screw to use, or any other points regarding this type of installation, please consult a contractor or other qualified person before proceeding. Be sure to follow the procedure given here when carrying out installation. Kenwood can assume no liability for injury or damage that may occur if a speaker setup falls from the wall as a result of incorrect installation or insufficient support strength. [. . . ]