User manual KENWOOD DDX7035

[. . . ] Error Specifications 91 92 93 94 96 English 3 B64-4502-00_01_K_English. indd 3 09. 4. 20 8:59:02 AM How to read this manual This manual uses illustrations to explain its operations. Source Control Screen The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Switches to the source control screen to use various functions. 1 Display the Source Control Screen See <How to Display the Source Control Screen>. 2 Operation on the Source Control screen 1 Selecting a screen item Select and choose an item on the screen. [. . . ] 2 Display the Outgoing Calls, Incoming Calls, or Missed Calls screen 2 Display the Voice Recognition screen 3 Say the name registered in the Phonebook 3 Select from calls list Example : Outgoing Calls screen When a beep is heard, say the name within 2 seconds. When a beep is heard, say the category within 2 seconds. If there are more than one phone numbers registered under the same name, go to step 4. 4 Select a Phone number category Calls the selected phone number. 4 Make a call ⁄ • The Outgoing Calls list screen, Incoming Calls list, or Missed Calls list screen shows the list of the calls originated from or received at this unit. They are not the ones stored in the cell-phone memory. Selects the Phone number category. Calling by Voice Recognition Calls by recognizing the registered voice. 5 Make a call ⁄ • In order to perform voice recognition, voice must be registered in the Phonebook data. See <Voice Registration> (page 55). Or, to perform voice recognition by Phone number category (Home, Office, Mobile etc. ) of Phonebook data, a key word voice must be registered. See <Key Word Voice Registration> (page 56). ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation. 1 Display the Hands-Free Control screen See <Making a call> (page 51). English 53 B64-4502-00_01_K_English. indd 53 09. 4. 20 8:59:38 AM Hands Free Unit Control Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). Up to 35 voices can be recorded in one cell-phone. 1 Display the Phonebook Detail screen Go through the procedure of <Calling by Phonebook> (page 52). 2 Select the name to register 1 1 Selects a name. [Record] Registers the voice for voice recognition to the selected Phonebook. If there are already 35 voice tags registered for the same cell-phone, [Record] button is deactivated. [Play] Plays the voice registered in the selected Phonebook data. [Delete] Deletes the voice registered in the selected Phonebook data. Touch to display the confirmation screen. Touch [Yes] to delete or [No] to cancel. 3 Display the voice registration screen ⁄ • Either the time interval for automatic answer set on this unit or the time interval set on the cell-phone, whichever is shorter, takes effect. • Select the speaker which is further from the microphone in order to prevent howling or echoes. 4 Say the name to register (1st try) Say within 2 seconds after the Beep. Next page 3 English 55 B64-4502-00_01_K_English. indd 55 09. 4. 20 8:59:39 AM Hands Free Unit Control 5 Say the name to register (2nd try) Say within 2 seconds after the Beep. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IC (Industry Canada) Notice Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. [. . . ]