User manual KENWOOD DF310

[. . . ] Never touch the bowl, pour away oil or move your fryer while the oil's hot. After cleaning, ensure all parts are completely dry before use. This fryer is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with this appliance. [. . . ] Don't exceed the maximum food quantities stated. The light will come on and off as the fryer maintains the temperature. 5 When ready open the lid and raise the basket. To drain the food hook the basket rest on the side of the bowl . G To re-use oil, allow to cool then pour the oil through fine muslin or absorbent paper. G Always unplug the fryer after use. G G G before using for the first time 1 Remove all packaging. 2 Dismantle: see `to dismantle, assemble and use your fryer'. 3 Wash the parts: see `cleaning'. 2 G G G G G G hints We would recommend the use of a good quality oil for deep frying, such as corn oil or groundnut oil. A good quality solid fat may also be used. Other oils may be used if they are specifically recommended by the manufacturer for deep frying. Never mix different oils or fat and do not use olive oil, butter or margarine as they will smoke or bubble over. Pre-cooked food needs a higher temperature than raw food. The outside may look ready before the inside is cooked. Keep your fryer with oil (cooled and strained) inside it, ready for use. Before frying battered food, drain off excess batter. To make chips, cut the potatoes up evenly, so they G G cook evenly. For best results use dry floury textured potatoes i. e. To prolong the life of your fryer, filter the oil after each use and change it after 8 - 10 uses. [. . . ] UK If you need help with: using your fryer or servicing or repairs (in or out of guarantee) call Kenwood on 023 92392333 and ask for Customer Care. Have your model number ready - it's on the underside of the fryer. spares and attachments call 0870 2413653 other countries Contact the shop where you bought your fryer. G G G G G G G G Troubleshooting guide Problem Fryer does not work Possible Cause Fryer not plugged in Fuse blown Solution Check fryer is plugged in Check the fuse/circuit breaker for your installation and replace the fuse if necessary. If this does not solve the problem refer to the "service" section. [. . . ]