User manual KENWOOD DFK-3D

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only *Other countries . . . . . . . . . . . AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. [. . . ] Please use single-side recording if this is to be avoided. Convenient Recording Methods 37 Recording an entire CD onto tape (CD direct recording) ÷ This function is canceled when the program mode is activated. ÷ This function is available only when the CD player is in stop mode. CURSOR ENTER SET Preparation ÷ Perform step 3 ( "Select the tape transport direction") on page 26. ÷ Perform steps 2 to 4 of "Selecting the reverse mode" on page 25. 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "CDTape Rec". SET CURSOR Application section 3 Select the "Direct Rec". SET CURSOR 4 Start recording Total number of tracks in CD, total play time ENTER To stop operation in the middle Press the HOME key to abort and cancel the operation and return to the basic screen. 38 Convenient Recording Methods Recording every desired track in CD onto tape (CD one-track recording) During playback of a CD track, only the track being played can be selected and recorded from the beginning. CURSOR ENTER SET ÷ CD random playback cannot be recorded. Preparation ÷ Perform step 3 ( "Select the tape transport direction") on page 26. ÷ Perform steps 2 to 4 of "Selecting the reverse mode" on page 25. 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "CDTape Rec". SET CURSOR Application section 3 Select the "One Track Rec". SET CURSOR 4 Start recording ENTER CD track No. being played, elapsed play time of the track being played To stop operation in the middle Press the HOME key to abort and cancel the operation and return to the basic screen. Convenient Recording Methods 39 Recording desired CD tracks in a desired order onto tape (CD program recording) The desired tracks in a CD can be programmed in a desired order and recorded. ÷ This function is available only when the CD player is in stop mode. CURSOR ENTER SET Preparation ÷ Perform step 3 ( "Select the tape transport direction") on page 26. ÷ Perform steps 2 to 4 of "Selecting the reverse mode" on page 25. 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "CDTape Rec". SET CURSOR 3 Select the "Program Rec". SET CURSOR Application section 4 Program CD tracks. Follow 5 to 7 in step 1 on page 32. Number of programmed CD tracks, total play time of the program 5 Start recording ENTER To stop operation in the middle Press the HOME key to abort and cancel the operation and return to the basic screen. 40 Tone control and sound field effect adjustment CURSOR ENTER SET 4, ¢ Adjusting the external input level Use the following procedure to adjust the levels of the Video1 and Video2 inputs. Adjusting the subwoofer output level (NV600 only) 1 Display the "Function" menu. SET CURSOR 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "Input Level". SET CURSOR 2 Select the "S. W. Level". SET CURSOR 3 Select the "Video1" or "Video2" . Application section CURSOR 3 Adjust the level of the subwoofer output. 4 ­P. CALL­ ¢ 4 Adjust the input level of the selected input. 4 ­P. CALL­ The adjustment range is between 1 and 5. 4 Press the ENTER key ENTER ¢ The adjustment range is between +3 and -4. 5 Press the ENTER key ENTER Tone control and sound field effect adjustment 41 Bass Boost and tone control The Bass Boost function allows you to enhance or compensate for the low frequencies and the tone control function is used for fine adjustments of the bass (low frequencies) and treble (high frequencies). ÷ The sound field effects of Bass Boost and tone control cannot be used simultaneously. 4, ¢ CURSOR ENTER SET Selecting the bass boost (NV-500 only ) 1 Display the "Function" menu. SET CURSOR Tone adjustment The lowest and highest frequency bands can be adjusted independently. 1 Display the "Function" menu. SET CURSOR 2 Select the "Listen Mode". SET CURSOR 2 Select the "Tone Control". SET CURSOR 3 Select the message to be displayed, "Bass Boost Off" or "Bass Boost On". The tone control setting is switched off. The tone control setting is recalled whenever the Bass Boost setting is switched off. SET CURSOR 3 Select the message to be displayed, "Bass" or "Treble". The bass boost setting is switched off. Application section CURSOR 4 Adjust the level of the selected tone. 4 ­P. CALL­ 4 Select the message to be displayed, "On" or "Off", and press the SET key. SET CURSOR ¢ The adjustment range is between +4 and -4. 5 Press the ENTER key ENTER 42 Tone control and sound field effect adjustment Dolby Virtual setting The Dolby Virtual function is designed to provide a simulated surround effect from two speakers on the left and right. This is a convenient function for playing a movie, etc. During playback in normal mode: Playing time of the track being played. During stop in program mode: Playing time of the first programmed track. During playback in program mode: Playing time of the track being played. In normal mode: Total playing time of the disc. In program mode: Total playing time of the programmed tracks. Adjusting the display contrast Use the following procedure to adjust the density of the display on the remote control unit. 49 CURSOR ENTER SET 4, ¢ 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "Contrast". SET CURSOR 3 Adjust the contrast. SET 4 ­P. CALL­ ¢ Application section 4 Press the ENTER key ENTER 50 Remote control of external components Registering the controlled components in the remote control unit The remote control unit can also be used to control the major functions of externally connected components such as a TV, VCR and DVD player. To make the control possible, it is required to select the manufacturer and type (VCR, DVD, etc. ) of each component and register it in the memory of the remote control unit. Note that, with components from certain manufacturers or of certain types, remote control may not be available or the controllable functions may be limited. CURSOR ENTER SET Registering the TV to be used 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "TV". SET CURSOR 3 Select the manufacturer. SET CURSOR The manufacturer list is displayed. Application section 4 Select the type of the remote control codes. SET CURSOR 5 Check the remote control operations. SET 6 If the operations are normal, press the ENTER key to set it. ENTER ÷ Press the SET key and ensure that the component is turned ON. ÷ If normal operation cannot be performed, place the cursor on "Back" and re-select the code type. Be sure to check the results later. Remote control of external components 51 Registering the component connected to the rear-panel Video1 or Video2 input 1 Display the "Function" menu. SET CURSOR 2 Select the message to be displayed, "Video1" or "Video2". SET CURSOR 3 Select the type of the component (VCR, DVD, etc). SET CURSOR 4 Select the manufacturer. SET CURSOR ÷ The cable tuner and DSS operations are not available in other areas than the U. S. A. ÷ The displayed information is variable depending on areas. The manufacturer list is displayed. 5 Select the type of the remote control codes. SET CURSOR Application section 6 Check the remote control operations. SET 7 If the operations are normal, press the ENTER key to set it. ENTER ÷ Press the SET key and ensure that the component is turned ON. ÷ If normal operation cannot be performed, place the cursor on "Back" and re-select the code type. [. . . ] 531 kHz ~ 1, 602 kHz 10 kHz step . . . . . . . . . . . . . . . . . . . . . . . . 530 kHz ~ 1, 610 kHz LW tuner section (For U. K. only) Tuning frequency range . . . . . . . . . . . . . . 153 kHz ~ 279 kHz [CD player section] Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]