User manual KENWOOD DMC-J3

[. . . ] Introduction Unpacking PORTABLE MINIDISC PLAYER IMPORTANT SAFEGUARDS (En) Caution : Read this section carefully to ensure safe operation. Please read all of the safety and operating instructions before operating this unit. For best results, follow all warnings placed on the unit and adhere to the operating and use instructions. These safety and operating instructions should be retained for future reference. 1. [. . . ] Charging start (The indication goes out after charging. ) Volume DOWN key *BASS BOOST mode Using the Clip Press and release. VOLUME To DC IN jack ÷ The remote control unit can be clipped to a bag or a pocket. HOLD switch Clip ÷ When the charging indication does not light though the rechargeable battery has been set correctly, it is possible that the life of the rechargeable battery has been reached. ÷ The time needed to charge the battery fully is about 4 hours. ÷ A fully charged battery can be used for about 5 hours. (Charging time may differ slightly depending on the environment the unit is used in. ) £ HOLD3 DMC-J3(En/M) 2 Playback (Basics) Playback (Application) Fast forward / fast reverse (SEARCH) Setting AUTO POWER SAVE Operate the key while playback is in progress. (only by remote control operation). Playback (Application) Convenient functions Avoiding faulty operation (HOLD) When you are operating the unit on a train or when you are carrying it with the power off, this function allows you to prevent faulty operation due to accidental key operation. (Both the main unit and remote control should be carried with the HOLD function engaged. ) Adjust the volume Min unit : Adjust the volume with the VOL. Remote control: Adjust the volume with the volume UP/volume DOWN keys. 1 Press the SHIFT key 2 Press and hold down either the 4 key or the ¢ key. ÷ Volume level indicator (0 to 30). (The volume level is displayed on the remote control. ) For forward search: keep pressing the ¢ key during playback. For reverse search: keep pressing the 4 key during playback. Press during playback or stop status. Normally, the unit is set to "auto PS" mode to conserve the battery. When using the unit in a place where it is subject to vibration or impact, set "PS off" mode before operating the unit. (only by remote control operation). ÷ When you lift your finger off the key, normal playback will be resumed. 1 Press the SHIFT key 2 Keep pressing the 38 key until the display appears. The play mode changes each time the 38 key is pressed. Activating HOLD status for main unit keys only Activating HOLD status for remote control keys only To release UP DISPLAY To pause playback Press during playback status. 1. In fast forward mode, stop status is engaged when the end of the last track Notes is reached. In reverse mode, playback starts when the start of the first track is reached. Depending on recording conditions, sound interruptions may occur during a fast forward/reverse operation. ÷ Each time the key is pressed, pause and playback modes are changed over. 1 "auto PS": power conservation mode 2 "PS off" : skip guard mode HOLD HOLD 3 HOLD 3 DOWN BASS BOOST ø HOLD HOLD Min unit : Press the PLAY / PAUSE (3) Remote control : Press the PLAY / PAUSE (38) Changing the display (only by remote control operation). To release To HOLD To HOLD Selecting Play Mode Press during playback or stop status. (Random mode cannot be engaged while playback is in progress. ) (only by remote control operation). Stopping playback Press during playback or pause status. When pressed during STOP operation: 1 Press the SHIFT key 2 Press the volume UP key The mode changes each time the When pressed during PLAY operation: 1 Press the SHIFT key 2 Press the volume UPkey The mode changes each time the Activating the operating tone (Beep) The operating tone can be activated or deactivated. (only by remote control operation). Min unit : Press the STOP /OFF (7) Remote control : Press the STOP /OFF (7) 1 Press the SHIFT key 2 Press the PLAY (3) key Repeat / Random mode display The Play Mode changes each time the 38 key is pressed. Character information indication volume UP key is pressed. 1 Disc name 2 Total number of tracks 3 Total playing time volume UP key is pressed. 1 Title of track being played 2 Number of track currently being played 3 Elapsed time of track currently being played Deactivating the Operating Tone 1 Press the SHIFT key 2 Keep pressing the volume DOWN key until "BP off" is displayed. ÷ The operating tone will beep twice. ÷ The operating tone will not beep even when an operation key is pressed. Activating the Operating Tone 1 Press the SHIFT key 2 Keep pressing the volume DOWN key until "BP on" is displayed. ÷ The operating tone will beep once. ÷ The operating tone will beep when an operation key is pressed. Turning the power off Press during stop status. Min unit : Press the STOP /OFF (7) Remote control : Press the STOP /OFF (7) ÷ The power will automatically turn off if the unit is not operated for about 3 minutes after it has stopped. 1 Not lit : Released 2P : The track being played will be played repeatedly. [. . . ] 2 Do not affix a label over another label. 3 Avoid air bubbles and turned-back corners. ÷ If the label is not properly affixed, it may get stuffed into the cartridge, making it impossible to remove the disc. ÷ If the label is not properly affixed, peel it off carefully and affix it properly. Message "noDISC" "BLANK " Meaning ÷ There is no MD in the unit. [. . . ]