User manual KENWOOD DMC-K3

[. . . ] Introduction Unpacking PORTABLE MINIDISC PLAYER Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. [. . . ] 2 "PS off" : skip guard mode. Adjust the volume Main unit : Adjust the volume with the 5 (volume up)/ (volume down) keys. Remote control: Adjust the volume with the + (volume up) / ­ (volume down) keys. Press during playback or stop status. (only by remote control operation) The mode changes each time the 4 or ¢ key is pressed. 2 "BASS 1" : Bass is boosted slightly. 3 "BASS 2" : Bass is boosted more. ÷ Volume level indicator (0 to 30). (The volume level is displayed on the remote control. ) 1 Press the MODE key 4 times. 2 Press the 4 or ¢ key. For forward search: For reverse search: keep pressing the ¢ key durkeep pressing the 4 key during playback. ÷ When you lift your finger off the key, normal playback will be resumed. In fast forward mode, stop status is engaged when the end of the last track is reached. In reverse mode, playback starts when the start of the first track is reached. Depending on recording conditions, sound interruptions may occur during a fast forward/reverse operation. To pause playback Press during playback status. ÷ Each time the key is pressed, pause and playback modes are changed over. Notes Note When the bass is boosted, raising the volume excessively will result in sound distortion. If this happens, either lower the bass level or the volume level. Activating the operating tone (Beep) Stopping playback Press during playback or pause status. Remote control : Press the 7 key. Changing the display (only by remote control operation) Convenient functions Avoiding faulty operation (HOLD) During playback status 1 Press the MODE key twice. The mode changes each time the 4 or ¢ key is pressed. 2 Number of track currently being played. 3 Elapsed time of track currently being played. 4 "UU KENWOODUU " logo display. When you are operating the unit on a train or when you are carrying it with the power off, this function allows you to prevent faulty operation due to accidental key operation. (Both the main unit and remote control should be carried with the HOLD function engaged. ) The operating tones (beep) which are produced every time one of the keys listed below are pressed can be activated or canceled (deactivated). (only by remote control operation) 1 When the MODE key is held depressed for more than 2 seconds. The play mode changes each time the 4 or ¢ key is pressed. [. . . ] securely. Affixing the Label Main unit Meaning of display messages Message "noDISC" "BLANK " Meaning Action ÷ Insert a MD into the unit. ÷ Nothing is recorded on this ÷ Replace the disc with a MD. ÷ The *UTOC contents are ÷ Replace the MD. ÷ The disc is scratched or dam- ÷ Replace the MD. [. . . ]