User manual KENWOOD DNX5210BT

[. . . ] · Do not watch or fix your eyes on the unit's display when you are driving for any extended period. · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Failure to avoid the following potentially hazardous situations may result in injury or property damage. The navigation system is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving. [. . . ] While navigating a route, touch the text bar on the map page to open the Turn List. Or, from the Menu page, touch Tools > Turn List. GPS Info Page From the Menu page, touch the signal strength bars in the upper left corner to view the GPS Info page. Or, from the Menu page, touch Tools > GPS Info. 1 2 1 3 2 1 Sky view 2 Satellite signal-strength bars The sky view shows the satellites you are receiving. The satellite signal-strength bars indicate the strength of each satellite you are receiving. A solid bar indicates the GPS satellite is ready for use. GPS Settings From the Menu page, touch Settings > General > GPS. You can also access the GPS Settings by touching the GPS Settings button on the GPS Info page. · Simulator Mode--touch Off to turn the GPS receiver off. · Set Position--set your position, if Use Indoors is enabled. Select your location on the map and touch OK. · WAAS/EGNOS--disable and enable WAAS/EGNOS. WAAS and EGNOS are systems of satellites and ground stations that provide GPS signal corrections, giving you even better position accuracy. For example, if a road sign indicates that the street is closed for the next 2 miles, touch 2 miles in the list. The navigation system recalculates your route for the next 2 miles. · Detour by Road(s) In Route--select roads on your route to avoid. For example, if the highway ramp is closed, select the ramp in the list of roads. The navigation system recalculates your route to avoid that ramp. · Detour by Traffic Event on Route--if you are using an FM Traffic Receiver, you can detour around traffic events. · Remove All Detours--touch to remove any detours you have entered for the route. 3 Touch the second corner and touch Next. 4 Touch Finish. Adding Avoidances From the Menu page, touch Settings > Navigation > > Avoidance Setup. Creating Custom Avoids You can enter specific areas and roads to avoid on your routes. From the Avoidance Setup menu, touch two times and then touch Custom Avoids. 1 Touch Add New Avoid Area or Add New Avoid Road. 18 DNX5220/DNX5210BT GPS Navigation Instruction Manual Using the Logs As you travel, the navigator creates a bread-crumb trail (track log) of your movement. Adjusting the Track Log From the Menu page, touch Tools > My Data > Track Log. · Recording--turn the track log recorder on and off. · Percentage Full--displays the current percentage capacity of the track log. [. . . ] To update the map data: 1 Go to www. garmin. com/Kenwood. For the DNX5220/DNX5210BT, select Order Map Updates, and then follow the Web site checkout procedure. 2 After you receive your new map data DVD, follow the instructions provided with the DVD to install the new map data in your unit. 2CAUTION Garmin is not responsible for the consequences of using a custom POI database, or for the accuracy of the safety camera or other custom POI database. To load custom POIs into the unit: 1 Download a POI database file from the Internet. [. . . ]