User manual KENWOOD DNX5380M

[. . . ] Error Specifications 91 92 94 96 English 3 How to read this manual This manual uses illustrations to explain its operations. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. [. . . ] 3 Select a Phone number category 4 6 5 7 2 Utter the voice registered in the PhoneBook 1 2 8 Utter within 2 seconds after the Beep. 1 Displays the recognized phone number or address. 2 Cancels voice recognition. 4 Calls the displayed phone number. 5 Creates an SMS to the displayed address. See <SMS (Short Message Service)> (page 55). 4 Make a call If the voice recognition is succeeded and there is only one phone number found: / · A message is displayed if the voice is not recognized. Read the message for the further operation. 3 Make a call. 3 Displays the phonebook list. 50 DNX5120/DNX5380M/DDX512/DDX5032 Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. 1 Display the Hands Free Setup screen 2 Setup each item 1 2 3 4 5 6 5 Sets the beep of the incoming SMS. ( "ON") "ON": Beep is heard. 6 Returns to the Hands-Free Control screen. 2 Display the voice registration screen 3 Utter the voice to register (1st try) 3 2 2 Registers the voice. 3 Cancels voice registration. Utter within 2 seconds after the Beep. 4 Utter the voice to register (2nd try) 52 DNX5120/DNX5380M/DDX512/DDX5032 Key Word Voice Recognition Registers the voice to select the Phone number category by Voice Recognition. 4 Utter the voice to register (1st try) 7 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 44). 6 6 Registers the voice. 7 Cancels voice registration. Utter within 2 seconds after the Beep. 5 Utter the voice to register (2nd try) 2 Select the Phone number category to register 1 2 3 4 6 End voice registration 5 1 Selects the Phone number category. "REC" turns on for data with voice for voice recognition already registered. 2 Registers voice for the selected Phone number category. 3 Plays voice registered for the selected Phone number category. 4 Deletes voice registered for the selected Phone number category. Touch to display the confirmation screen. [. . . ] Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error : Change the source to any source other than USB. Remove the USB device. Authorization Error: Connection to the iPod has failed. Remove the iPod and then reconnect it. The unit does not support the iPod. An unplayable disc is inserted. Read Error : Disc is quite dirty. See <iPod that can be connected to this unit> (page 7). Update your iPod: The iPod's software is an older version which the unit can not support. Clean the disc, referring tot he section on <Handling discs> (page 6). Disc is upside down. Load the disc with the labeled side up. Region code Error : The disc you wanted to play has a region code that cannot be played with this unit. Parental level Error: The disc you wanted to play has a higher level than the parental level you set. Confirm that the software for the iPod is the latest version. See <iPod that can be connected to this unit> (page 7). 94 DNX5120/DNX5380M/DNX5380M/DDX512/DDX5032 Check Sirius: The unit cannot recognize the connected Sirius Tuner Box. CH UNAUTHORIZED: The selected channel is not subscribed. [. . . ]