User manual KENWOOD DP-1050

[. . . ] Frequency Offset AMP Control Traffic Information CRSC (Clean Reception System Circuit) Receive mode Setting SIRIUS ID (ESN) display Station/Disc Naming (SNPS/DNPS) Auxiliary Input Display Setting Text Scroll Built-in Auxiliary input Setting CD Read Setting Voice Index ACDrive firmware version display Unique ID display Audio Preset Memory Audio Preset Recall Demonstration mode Setting 36 Basic Operations of remote control 50 Accessories/ Installation Procedure 53 Connecting Wires to Terminals Installing the Escutcheon Installation Removing the Unit Troubleshooting Guide Specifications 54 55 56 58 59 63 The "AAC" logo is trademark of Dolby Laboratories. English | 3 Safety precautions 2 WARNING To prevent injury while using this product, take the following safety precautions: · To prevent a short circuit and possible fire, never put any metallic objects (such as coins or metal tools) inside the product. · If you are the driver and your vehicle is moving, do not watch the product's display or use its controls for an extended period. · Do not use this product in any way that prevents you from driving safely. [. . . ] Each time you push the knob to [FM], the band alternates between the HF1, HF2, and HF3 bands. Select the HD AM band Push the Control knob toward [AM]. 3 Tune up or down band Push the Control knob towards [4] or [¢]. English | 35 Menu system Control knob MENU SRC Menu display DP-1050 Menu display DPX501 Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. · Three menu items appear on the display. The menu item displayed at the center is the one you can adjust. (DP-1050 only) 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards [FM] or [AM]. Example: When you want to set the beep sound select the "Beep"/ "BEEP" display. 3 Set the menu item Push the Control knob towards [4] or [¢]. Example: When you select "Beep"/ "BEEP", each time you push the knob it alternates between "Beep : ON"/ "BEEP ON" or "Beep : OFF"/ "BEEP OFF". Beep canceled. 4 Adjust each item Push the Control knob towards [FM] or [AM]. 5 Repeat step 3 and 4 operation and adjust the date. In Standby mode 6 Exit Date adjustment mode Press the [MENU] button. Manual Clock Adjustment · You can do this adjustment when the <Synchronize Clock> (page 38) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "Clock Adjust"/ "CLK ADJ" display. Function of the DP-1050 In Standby mode Date Mode Setting the date format. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 1 Select Date Mode Push the Control knob towards [FM] or [AM]. Select the "Date Mode" display. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 2 Select the date format Push the Control knob towards [4] or [¢]. 3 Exit Menu mode Press the [MENU] button. 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Synchronize Clock Function of the DP-1050 In Standby mode Synchronizing the RDS station time data and this unit's clock. Display "SYNC : OFF"/ "SYNC OFF" "SYNC : ON"/ "SYNC ON" Setting Adjust the time manually. Synchronizes the time. Date Adjustment 1 Select Date Adjust mode Push the knob towards [FM] or [AM]. Select the "Date Adjust" display. 2 Enter Date Adjust mode Press the Control knob for at least 1 second. The date display blinks. · It takes 3 to 4 minutes to synchronize the clock. 38 | English In Standby mode Indirect Lighting You can illuminate the area around the display with soft indirect lighting. Display Setting "Lighting : ON"/ "LGHT ON" Turns indirect lighting on. "Lighting : OFF"/ "LGHT OFF" Turns indirect lighting off. Function of the DPX501 In Standby mode Switching preout Alternating the preout between the rear and subwoofer. [. . . ] If the "Mecha Error/ E-99" code does not disappear, consult your nearest service center. Hold Error/ HOLD: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. [. . . ]