User manual KENWOOD DP-K1000

[. . . ] COMPACT DISC PLAYER DP-K1000 INSTRUCTION MANUAL Decla Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands © B60-5719-00/00 (EW/XW) BT Safety Precautions Before Applying Power Caution: Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. [. . . ] 4 If there are any other components connected to the system, check that they are all turned off before disconnecting the cables. English 11 Connecting the System Connections Caution for connection Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise interference or no sound at all. Do not plug the AC power cord into an AC wall outlet until all the connections are completed. Before disconnecting any cords or cables, always turn the main unit off and unplug the power cord from AC wall outlet. R-K1000 To SYSTEM CONTROL To AC wall outlet System control cable To CD IN (COAX) Coaxial cable 2 1 B A To optical digital input (PCM signals) To analog audio input To AC wall outlet AC power cord Insert the plug firmly all the way into the AC wall outlet. MD recorder, etc. Amplifier (other than R-K1000) 12 DP-K1000 Connecting the System Connecting the R-K1000 (sold separately) 1 DIGITAL OUT (COAXIAL) To connect an R-K1000 (sold separately) to the DP-K1000, use the coaxial cable supplied with the DP-K1000 to connect the [CD IN (COAX)] terminal on the R-K1000 to the [DIGITAL OUT (COAXIAL)] terminal on the rear panel of the DP-K1000. 2 SYSTEM CONTROL To connect an R-K1000 (sold separately) to the DP-K1000, use the system control cable supplied with the DP-K1000 to connect the [SYSTEM CONTROL] terminal on the R-K1000 to the [SYSTEM CONTROL] terminal on the rear panel of the DP-K1000. Connecting Other Components A DIGITAL OUT (OPTICAL) Connect the optical digital input terminals on components such as MD recorders to the [DIGITAL OUT (OPTICAL)] terminal on the rear panel of the DP-K1000. B ANALOG OUT To connect an amplifier other than R-K1000 (sold separately) or an amplifier that does not have a digital input terminal to the DP-K1000, use the audio cable supplied with the DP-K1000 to connect the audio input terminal on the amplifier to the [ANALOG OUT] terminal on the rear panel of the DP-K1000. Microcomputer malfunctions If the system is connected correctly and still does not operate normally or shows display errors, reset the microcomputer. (P. 32) When a related system component is connected, read the instruction manual for that component also. English 13 Component Names and Functions Main unit Main unit keys with the same names as keys on the remote control have the same functions as the remote control keys. Power (P. 18) Turns the unit on or off (Standby). Standby indicator Lights red in Standby mode E (P. 18, 19) Starts playback. Press again to pause playback. Dial Lighting (P. 29) CD tray F (P. 19) Stops playback. LCD tray open/close (P. 18) Display (P. 15) Remote sensor (P. 17) G/H (P. 19) Standby Mode While the Standby indicator on the main unit is lit, the unit is using a very weak current to maintain the built-in memory. When the main unit is in this mode, you can turn it on using the remote control. System Control Connection If you use system control connection to connect an R-K1000 (sold separately) to the DP-K1000, the DP-K1000 operates as follows: When you play CD on the DP-K1000, input on the R-K1000 automatically switches to CD and you can use the R-K1000 remote control to control CD operations on the DP-K1000. Similarly, if you set the R-K1000 input to CD, the DP-K1000 starts playing the CD. Operation is linked so that turning the R-K1000 on and off turns the DP-K1000 on and off also. When the DIMMER, Display Saver and Auto Power Save functions are set on the R-K1000, they run on the DP-K1000 also. 14 DP-K1000 Component Names and Functions Display Displays numbers and text. Displays shown in this manual may differ from the actual displays. TOTAL: Lights during playback when the elapsed time for the entire disc is displayed. REMAIN: Lights when the remaining playback time for the current track is displayed. TOTAL/REMAIN: Lights when the remaining time for the entire disc is displayed during playback or when the playback time for the entire disc is displayed while playback is stopped. Lights during playback. (P. 18) Lights when playback is paused. (P. 27) Lights when an AAC file is playing. (P. 10) Lights in Program Playback mode. (P. 24) Lights when a WMA file is playing. (P. 10) Lights when an audio file or folder is playing. (P. 22, 23) REPEAT Lights during all-track repeat playback. (P. 28) REPEAT 1 Lights during single-track repeat playback. (P. 28) Lights when an MP3 file is playing. [. . . ] The higher the bit rate, the better the sound quality. Almost all discs normally referred to as "CDs" are actually CD-DA discs. A generic name for music CDs that contain text information such as the disc name, artist names and track names. An audio compression method developed by Germany's Fraunhofer IIS that achieves high rates of data compression by discarding data that is not readily audible by humans. [. . . ]