User manual KENWOOD DP-M993

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0. 21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. "LOAD" is displayed when discs are being exchanged on the disc changer. Track Repeat Repeat playing the track currently being listened to. Turning Repeat Play On/Off: Press the REP button to switch repeat play on and off. The REP indicator lights up when repeat play is turned on. The track number currently being heard blinks in the display. NOTE Repeat play is canceled when you eject the disc. Disc Repeat (Function of disc changers) Repeat playing the disc currently being listened to. Turning Disc Repeat Play On/Off: Press the REP button for at least one second to switch disc repeat play on and off. The D. REP indicator lights up when disc repeat play is turned on. The disc number currently being heard blinks in the display. NOTE Disc Search (Function of disc changers) Search forward or backward through the discs in a disc changer. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Repeat play is canceled when you stop playing the disc. -- 18 -- Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan : Press the SCN button. · This procedure is not to be used to store the disc and track titles for MDs that you record. · This function cannot be available during the clock display and while using disc scan or magazine random play. 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to 8 characters for each name. 2 Press the NAME. S button for at least two seconds. "Name Set" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 6 Press the NAME. S button. The disc name is stored and the disc name preset mode is canceled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. Press the DISC+ or DISC­ button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case)/Numerals/Symbols: A ~ Z 0~9 / + ­ Alphabet (lower case)/Numerals/Symbols: a ~ z 0~9 / + ­ NOTE 4 Each time the 38 button is pressed, the characters to be · The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. Up to 10 CDs can be registered with this unit. · Discs are identified by their total length and number of tracks. [. . . ] The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. No disc has been loaded in the disc magazine. ] The next MD will automatically be played. [. . . ]