User manual KENWOOD DP-R4060

[. . . ] THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The marking of products using lasers CLASS 1 LASER PRODUCT The marking this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product. Location: Back panel 2 DP-R4060 Safety Precautions IMPORTANT SAFETY INSTRUCTIONS Caution: Read this page carefully to ensure safe operation. Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] Never use a cracked, chipped or greatly warped disc. Otherwise, damage or malfunction of the player may result. Also, do not use a disc with a non-circular shape as this may result in malfunction. Notes on CD-ROM/CD-R/CD-RW discs If the CD-ROM, CD-R or CD-RW disc in use has a printable label surface, the disc may be unable to be taken out of the system due to sticking of the label surface. To prevent malfunction of the system, do not use such a disc. Notes on installing the system Always install the system on a flat, stable surface. When installing the system on a stand of some sort, be sure to check the strength of the stand. Observe the following cautions when installing the system. Insufficient heat radiation may build up internal heat and cause a malfunction or fire hazard. Leave the spaces specified below around the cabinets of the main unit. Back panel: 10 cm or more Install the system so that the power outlet is easily accessible from the user, and unplug the power cord from the power outlet immediately in case of a trouble. Note that the power supply to the system is not shut down completely by simply setting the power key to OFF. To shut down the power supply completely, it is required to unplug the power cord. CAUTION Notes on transporting or moving the system Before transporting or moving this system, take the following actions: 1 Remove any CDs from the unit. (P. 28) REPEAT 1 Lights during single-track repeat playback. (P. 28) Lights when an MP3 file is playing. (P. 10) English 15 Component Names and Functions Remote control Remote control keys with the same names as keys on the main unit have the same functions as the main unit keys. Opens/Closes the CD tray. (P. 18) Turns the unit on or off (Standby). (P. 28) Selects the information shown on the display. (P. 26) Clears the program content settings. (P. 24­26) Selects the playback mode. (P. 23) Enters number or selects the track. (P. 24­26) 16 DP-R4060 Component Names and Functions Using the remote control After plugging the main unit into the AC wall outlet, press the power [K] key on the remote control unit to turn the system on. Once the system is turned on, press the key for the function you want to use. Point the remote control at the remote sensor when using it. Approx. 6m The remote control may not operate correctly if direct sunlight or light from a high-frequency fluorescent lamp (such as an inverter type) is shining on the remote sensor. [. . . ] If you reset the microcomputer with a disc loaded, the disc is automatically ejected. In that case, remove the disc and close the CD tray. 32 DP-R4060 Glossary of Terms Term AAC Meaning An abbreviation for "Advanced Audio Coding". This is a compression standard that applies only to the audio component in image compression methods used for digital broadcasting, etc. A number indicating the amount of information processed per second. [. . . ]