User manual KENWOOD DP-R6060

[. . . ] · Do not watch or fix your eyes on the unit's display when you are driving for any extended period. · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. [. . . ] step 5 Play the selected music Press the Control knob. Scrolling the file/folder name display Push the Control knob toward up for at least 2 seconds. Cancelling File Select 2 Press the [F. SEL] button. English | 21 HD Radio control features FM Control knob AUTO/AME AM SRC 1-6 Band display Frequency display ST indicator Preset station number About HD Radio · When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. · With the HD Radio tuner, you can use the similar functions to <Station Preset Memory>, <Auto Memory Entry>, <Tuning Mode> and <Preset Tuning> of Tuner features. Refer to Tuner features for how to use the functions. Tuning Selecting the station. 1 Select HD Radio source Press the [SRC] button. Select the "HD RADIO" display. 2 Select the HD FM band Push the Control knob toward [FM]. Each time you push the knob to [FM], the band alternates between the HF1, HF2, and HF3 bands. Select the HD AM band Push the Control knob toward [AM]. 3 Tune up or down band Push the Control knob towards [4] or [¢]. 22 | English Menu system Control knob MENU SRC Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. / · When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. / In Standby mode Manual Clock Adjustment / · You can do this adjustment when the <Synchronize Clock> (page 25) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. · Set the Display Illumination Control when the <Demonstration mode Setting> (page 29) is set to OFF. · When the display is off, pressing any key will turn on the display. · When the display is off, you cannot perform any operation except for the following: · Volume · Attenuator · Selecting the source · Ejecting the disc · Turning off the power · USB remove mode · During function control, such as the Menu System, the display stays on. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. In Standby mode Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "DIM AUTO" "DIM OFF" Setting The display dims. The display doesn't dim. 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. [. . . ] Or the unit is malfunctioning for some reason. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. Discs are being exchanged in the Disc changer. [. . . ]