User manual KENWOOD DPC-541

[. . . ] AC 120 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only Caution : Read this section carefully to ensure safe operation. Europe and U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only *Other countries . . . . . . . . . . . . . [. . . ] In stopped condition, all discs can be exchanged. However, when the door panel is opened while "DISC DETECTION" is being displayed, it may not be possible to remove the disc which had been played. Accordingly, wait for the "DISC DETECTION" indication to go out before opening the door panel. When the disc information has been read in at the time of registration of disc information like title name, music type, etc. , the disc information can be recalled even when the disc insertion )¢ place is changed. : Keys and controls used in the operations described on this page. 4 Close the door panel. ÷ When a title name has been registered and the door panel is closed, reading operation is performed automatically. The display flashes. DDISCCREADING3 In regard to ALL DATA READ mode The disc information for all discs will be read. It is convenient to execute this mode before playback after discs have been exchanged. Close the door panel before operation. 1 Press the MODE key. MODE Each press switches the modes as follows: 1 2 3 4 MUSIC TYPE TITLE INPUT ALL DATA READ ALL INFORMATION 2 Select "ALL DATA READ". DISC SKIP 5 ALL DATA READ3 Search in progress or reading information The display flashes. DDISCCREADING3 3 Set the input. When the disc is CD-TEXT SET D001:: CDATEXT3 ÷ Repeat the above procedure so that the complete disc information is read into the CD player. ÷ In the case of a non-CD-TEXT disc, the "D001:NO CD TEXT" display will appear for approx. 3 seconds. To quit ALL DATA READ mode Press the 7 key. Notes 1. Please remove all CDs from the carousel before moving the unit. In case of blinking indication of "DISCXXX ERROR", open the door panel, confirm that the error disc has come to the center position, and then exchange the error disc. Normal play (TRACK mode) 12 Preparation ÷ Load discs into the carousel. Normal play (TRACK mode) CD-224M/DPC-541 (En) 0 : Keys and controls used in the operations described on this page. Playing tracks in order from track No. 1 Use the following procedure to play a CD in the original order of tracks from track No. 1. 1 Select the disc. DISC SKIP 5 Previous disc Next disc ÷Each press of a key increases (or decreases)the disc number. Holding the key depressed varies the disc numbers successively. ÷ The displays 1, 2 and 3 are shown in stop mode. Displaying all the text information In the case of a CD-TEXT disc, the text information shown below is displayed automatically during normal play (TRACK mode). 1 Press the MODE key. MODE 2 Select "ALL INFORMATION". DISC SKIP 5 The display flashes. A LL 3 I NF O R MATI ON 3 Set the input. SET To jump to the next track or to return to the previous track during display: CHARACTER/SEARCH 4 ¢ 1 2 3 4 5 6 7 8 Disc/Track Title Disc/Track Artist Disc/Track Songwriter Disc/Track Composer Disc/Track Arranger Disc/Track Message ID INFO. Genre INFO. : : : : : : : : Disc and track titles Singer (or performer) Songwriter Composer Arranger Message from sponsor or artist Record company, release date, etc. Genre information Return DOWN UP Jump To jump to the next item or to return to the previous item during display: DISC SKIP 5 ÷ Items from 1 to 6 are displayed in the sequence of disc and track. ÷ When there is no text information to be displayed "­ ­ ­ ­ ­" is scrolled on the display. ÷ In the case of a non-CD-TEXT disc, the "NO CD TEXT" display will appear for approx. 3 seconds. Return Jump To end ALL INFORMATION during display Press the MODE key. Programming tracks in desired order (PGM mode) 16 Use the following procedure to select desired tracks (up to 32 tracks) from up to 200 discs and program them in the desired order. Programming tracks in desired order (PGM mode) CD-224M/DPC-541 (En) Preparation ÷ Load discs into the carousel. ÷ Set the CD player to stop mode. 0 : Keys and controls used in the operations described on this page. 1 Press so that the PGM indicator lights. CHARACTER/ P. MODE P GM 3 S EL E C T1DI SC 2 Select the disc. 1 Select the disc number. DISC SKIP 5 Previous disc Next disc P GM 0 1 ED 2 0 01DI SC ÷ The disc number can be selected directly by using the DISC SELECTOR and numeric keys in place of the DISC SKIP keys. ÷ When the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Discs can be selected while looking at the recorded contents. "Registration of Title Name" ) ÷ If you make a mistake, press the CLEAR key and enter the disc No. ÷ Disc numbers which do not contain discs can be selected, but they are canceled at the time of playback. Within 8 seconds! 2 Set the input. SET Go to step 3 within 8 sec. 3 Select the track number. 1 Input the track number. 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 Press the numeric keys in the following order. . . Track No. 8 : 8 Track No. 14 : 14 Track No. 20 : 2) PRS 7 TUV 8 WXY 9 &()­/ +100 QZ 0 ', :?! [. . . ] 8 fs (352. 8 kHz) [Audio] Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz ~ 20 kHz, ± 0. 5 dB Signal to noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 98 dB Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 96 dB Total harmonic distortion + noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]