User manual KENWOOD DPC-631

[. . . ] · Characters that conform to ISO 8859-5 or ISO 88591 can be displayed. Refer to "MENU" > "Russian" of <Function Control> (page 6). · The RDS feature won't work where the service is not supported by any broadcasting station. · In this document, the description indicator will light means a status is displayed. [. . . ] Turn the Control knob or push it towards up or down. 3 Exit Demonstration mode Press the [FNC] button. When LX AMP unit connecting 4 Exit Clock adjustment mode Press the [FNC] button. AMP Control You can control the LX AMP connected to the unit. / · You can do this adjustment when "MENU" > "SYNC" in <Function Control> (page 6) is set to "OFF". 1 Select AMP Control item during Menu mode Select the "AMS Control" display. For how to select Function Control items, refer to <Function Control> (page 6). Date Adjustment 1 Select Date Adjustment item during Menu mode Select the "Date Adjust" display. For how to select Function Control items, refer to <Function Control> (page 6). 2 Enter AMP Control mode Press the Control knob for at least 1 second. 3 Select the AMP Control item for adjustment Push the Control knob towards up or down. / · For the details on the AMP Control item, see the Instruction manual attached to the LX AMP. 2 Enter Date adjustment mode Press the Control knob for at least 1 second. The date display blinks. 4 Adjust the AMP Control item Push the Control knob towards right or left. 5 Exit AMP Control mode Press the [FNC] button. 3 Adjusting Date Operation type Selecting the item (month, day, or year) Adjust each item Operation Push the Control knob towards right or left. Turn the Control knob or push it towards up or down. 4 Exit Date adjustment mode Press the [FNC] button. 18 | DPC-631/DPX303/DPX313 Audio Adjustments Function of DPC-631 Function of DPC-631 Cabin selection You can compensate the delay of the sound arrival time, which is caused by the installation position of the speakers, by selecting your environment from the following car types; Car type (rear speaker position) Not compensating. Compact car (rear door) Compact car (cargo) Sedan (rear door) Sedan (cargo) Station wagon (rear door) Station wagon (cargo) Minivan (rear door) Minivan (cargo) Sport-utility vehicle (rear door) Sport-utility vehicle (cargo) Passenger van (rear door) Passenger van (cargo) Calls the value adjusted at <DTA> (page 19). Display "OFF" "Compact1" "Compact2" "Sedan1" "Sedan2" "Wagon1" "Wagon2" "Minivan1" "Minivan2" "SUV1" "SUV2" "PassengerVan1" "PassengerVan2" "User" DTA (Digital Time Alignment) setting Adjusting fine tuning of the speaker position compensation value specified at <Cabin selection> (page 19). 1 Enter DTA setting mode Select "SOUND" > "S-SET" > "DTA". For how to select Function Control item, refer to <Function Control> (page 6). 2 Select the speaker you want to set Setting speaker Front speaker Rear speaker Subwoofer Display "DTA-Front" "DTA-Rear" "DTA-Sub" Turn the Control knob and push the center when the desired item is displayed. 3 Set the compensation value of the speaker position Turn the Control knob. Refer to <Appendix> (page 29) on how to set the compensation value. 1 Enter Cabin select mode Select "SOUND" > "S-SET" > "CABIN". For how to select Function Control item, refer to <Function Control> (page 6). 4 Exit DTA setting mode Press the [FNC] button. 2 Select the car type Turn the Control knob and push the center when the desired item is displayed. 3 Exit Cabin select mode Press the [FNC] button. / · You can compensate the distances in more details by using <DTA> (page 19) function. In addition, the value specified at <DTA> can be called by selecting "User". English | 19 Audio Adjustments Function of DPC-631 2 Select the item you want to set Turn the Control knob and push the center when the desired item is displayed. X'Over setting You can set a X'Over value for the speakers; Adjustment Item Display Front High Pass Filter "HPF-Front" Rear High Pass Filter Low Pass Filter Subwoofer level Subwoofer Phase Range Through/40/60/80/100/120/ 150/180/220 Hz "HPF-Rear" Through/40/60/80/100/120/ 150/180/220 Hz "LPF" 50/60/80/100/120/Through Hz "SUB-W LEVEL" ­15 -- +15 "SW PHASE" Reverse (180°)/ Normal (0°) 3 Set the value Turn the Control knob. 4 Exit Equalizer Control mode Press the [FNC] button. Function of DPC-631 Preset position selection According to the listening position, select the position from the following settings so that the normal position of the sound environment can be compensated in accordance with the selected position; Compensation seat Not compensating. (Only the low tone is compensated for when the tuner is selected as a source. ) · Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. - Set up the channel of sub source by "Zone2" of <Function Control> (page 6). - Adjust the volume of Front channel by [AUD] knob. - Adjust the volume of Rear channel by <Audio Control> (page 22) or [5]/[] button on the remote control (page 25). - The Audio Control has no effect on sub source. 2 Enter Speaker Setting mode Press the [AUD] knob. "SP SEL" is displayed. 3 Select the Speaker type Turn the [AUD] knob. 4 Exit Speaker Setting mode Press the [AUD] knob. 1 Select the source to adjust For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4). 2 Enter Audio Setup mode Press the [AUD] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [AUD] knob. 4 Adjust the Audio setup item Turn the [AUD] knob. 5 Exit Audio Setup mode Press the [AUD] knob for at least 1 second. English | 23 Audio Adjustments Function of DPX303/DPX313 Function of DPX303/DPX313 Audio Preset Memory Registering the value setup by Sound Control. The memory cannot be erased by the Reset button. Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 24). 1 Setup Sound Control Refer to the following operations to setup the Sound Control. - <Audio Control> (page 22) - <Audio Setup> (page 23) 1 Select the source For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4). 2 Select Audio Preset item during Menu mode (Other than Standby mode) Select the "Audio Preset" display. For how to select Function Control items, refer to <Function Control> (page 6). 2 Select Audio Preset item during Menu mode (Other than Standby mode) Select the "Audio Preset" display. For how to select Function Control items, refer to <Function Control> (page 6). 3 Enter Audio Preset mode Press the Control knob for at least 1 second. 3 Enter Audio Preset mode Press the Control knob for at least 1 second. 4 Select the Audio Preset Recall Turn the Control knob. Select the "Recall" display. 4 Select the Audio Preset Memory Turn the Control knob. [. . . ] The unit is malfunctioning for some reason. If the "Error 77" code does not disappear, consult your nearest service center. USB ERROR (Blink): Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON. If the same display is repeated, use another USB device. [. . . ]