User manual KENWOOD DPC-651

[. . . ] · Mounting and wiring this product requires skills and experience. For safety's sake, leave the mounting and wiring work to professionals. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. [. . . ] The Folder Select mode releases, and the Audio file in the folder being displayed plays. · This operation does not function when <All Random Play> (page 30) is ON. · This function is available only when the Play mode is set Genre, Artist, or Album. Cancelling the Letter Seek Press the [S. MODE] button. Function of ACDrive media 2 Start the Letter Seek Push the Control knob towards [4] or [¢]. The initial of Genre name, Artist name, or Album name is displayed and announced in order. · The announcement of the initial can be canceled by <Voice Index> (page 43). · When you push the Control knob to the reverse [4] or [¢] during Letter Seek, the initial is displayed and announced in the reversed order. · Once Letter Seek starts, it cannot be cancelled. Switching the Play mode Arrange the playing orders of the songs by categories. Each time you press the button, the Play mode alternates between the modes shown in the table below. (DPX501U only) Play mode Category which is to be arranged "PlayList Mode"/ "PLAYLIST" Play list order. "Genre Mode"/ "GENRE" By genre. "Artist Mode"/ "ARTIST" By artist. "Album Mode"/ "ALBUM" By album. Note, your Security Code is the 4 digit number entered in your "Car Audio Passport" in this package. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security Set"/ "CODE SET" is displayed. Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter"/ "ENTER" is displayed, "Security Set"/ "CODE" is also displayed. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep : ON"/ "BEEP ON" "Beep : OFF"/ "BEEP OFF" Setting Beep is heard. Beep canceled. 4 Select the digits to enter Push the Control knob towards [4] or [¢]. 5 Select the Security Code numbers Push the Control knob towards [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter"/ "RE-ENTER" is displayed, "Security Set"/ "CODE" is also displayed. 8 Do the step 4 through 7 step operation, and reenter the security code. "Approved"/ "APPROVED" is displayed. The Security Code function activates. · If you enter a Code different from your Security Code, you have to start over from step 4. English | 35 Menu system In Standby mode Manual Clock Adjustment · You can do this adjustment when the <Synchronize Clock> (page 36) is set as OFF. Function of the DPC-651 In Standby mode Date Mode Setting the date format. 1 Select Date Mode Push the Control knob towards [FM] or [AM]. Select the "Date Mode" display. 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "Clock Adjust"/ "CLK ADJ" display. 2 Select the date format Push the Control knob towards [4] or [¢]. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. [. . . ] Or the unit is malfunctioning for some reason. And then press the reset button on the unit. If the "Mecha Error/ E-99" code does not disappear, consult your nearest service center. Hold Error/ HOLD: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. [. . . ]