User manual KENWOOD DPC-721

[. . . ] If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future. Keep this manual handy for future reference. 2 U. S. A. [. . . ] Accordingly, wait for the "DISC DETECTION" indication to go out before opening the door panel. When the disc information has been read in at the time of registration of disc information like title, music type, etc. , the disc information can be recalled even when the disc insertion place )£ is changed. 4 Close the door panel. ÷ When a title has been registered and the door panel is closed, reading operation is performed automatically. The display flashes. DDISCCREADING3 In regard to ALL DATA READ mode The disc information for all discs will be read. We recommend to execute this mode before playback after discs have been exchanged. Close the door panel before operation. To display the title on a LCD remote control unit (provided with a KENWOOD Receiver or optional), perform the all data read operation first, and operate the LCD remote control unit with the door left closed. For the operation of the LCD remote control unit, refer to the instruction manual of the Receiver or LCD remote control unit. 1 Press the MODE key. MODE Each press switches the modes as follows: 1 2 3 4 5 MUSIC TYPE DISC SEARCH TITLE INPUT ALL DATA READ ALL INFORMATION 2 Select "ALL DATA READ". ALL DATA READ3 DISC SKIP DOWN UP Search in progress or reading information The display flashes. DDISCCREADING3 3 Set the input. SET When the disc is CD-TEXT D001:: CDATEXT3 ÷ Repeat the above procedure so that the complete disc information is read into the CD player. ÷ In the case of a non-CD-TEXT disc, the "D001:NO CD TEXT" display will appear for approx. 3 seconds. To quit ALL DATA READ mode Press the 7 key. Notes 1. Please remove all CDs from the carousel before moving the unit. If blinking "PLEASE WAIT" is displayed when the door panel is opened, do not attempt to change the disc. Normal play (TRACK mode) 12 Preparation ÷ Load discs in the carousel. Normal play (TRACK mode) DPC-721 (EN) 0 Playing tracks in order from track No. 1 Use the following procedure to play a CD in the original order of tracks from track No. 1. 1 Select the disc. DISC SKIP DOWN UP Previous disc Next disc ÷ Each press of a key increases (or decreases) the disc number. Holding the key depressed varies the disc numbers successively. ÷When the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Genre information 3 Set the input. SET To jump to the next track or to return to the previous track during display: CHARACTER DOWN UP Return 4 ¢ Jump To jump to the next item or to return to the previous item during display: DISC SKIP DOWN UP ÷ Items from 1 to 6 are displayed in the sequence of disc and track. ÷ When there is no text information to be displayed "­ ­ ­ ­ ­" is scrolled on the display. ÷ In the case of a non-CD-TEXT disc, the "NO CD TEXT" display will appear for approx. 3 seconds. Return Jump To end ALL INFORMATION during display Press the MODE key. Programming tracks in desired order (PGM mode) 16 Use the following procedure to select desired tracks (up to 32 tracks) from different discs and program them in the desired order. Programming tracks in desired order (PGM mode) DPC-721 (EN) Preparation ÷ Load discs in the carousel. ÷ Set the CD player to stop mode. 0 1 Press so that the "PGM" indicator lights. CHARA. /P. MODE P GM 3 S EL E C T1DI SC 2 Select the disc. Within 8 seconds! 1 Select the disc number. DISC SKIP DOWN UP Previous disc Next disc P GM 0 1 ED 2 0 01DI SC ÷ The disc number can be selected directly by using the DISC SELECTOR and numeric keys in place of the DISC SKIP keys. ÷ When the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Discs can be selected by the disc title. ) "Registration of Title" ÷ If you make a mistake, press the CLEAR key and enter the disc No. from the beginning. 2 Set the input. SET Go to step 3 within 8 sec. 3 Select the track number. 1 Input the track number. 1 2 3 4 Press the numeric keys in the following order. . . Track No. 8 : 8 Track No. 14 : 14 Track No. 20 : 2) H 5 I 6 J 7 K 8 L 9 M 0 N +10 O +100 P GM 0 1 ED 2 0 01T- -C ÷ To program the entire disc, press the SET key without inputting the track number. ÷ When the disc corresponds to CD-TEXT, or when the track titles have been registered, the track title is displayed. [. . . ] 8 fs (352. 8 kHz) [Audio] Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz ~ 20 kHz, ± 0. 5 dB Signal to noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 97 dB Dynamic range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 94 dB Total harmonic distortion + noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]