User manual KENWOOD DPX-3070B

[. . . ] When using this unit for the first time, cancel the Demonstration mode. Refer to <Canceling the Demonstration Mode> (page 8). About discs used with this unit • This unit can only play the CDs with . • The following discs cannot be used: -- Discs that are not round -- Discs with coloring on the recording surface or discs that are dirty -- Recordable/Rewritable disc that has not been finalized (For the finalization process, refer to your disc writing software, and your disc recorder instruction manual. ) -- 8 cm (3 inch) disc (Attempt to insert using an adapter can cause malfunction. ) 2 WARNING To prevent injury or fire, take the following precautions: • Stop the car before operating the unit. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. [. . . ] “MANUAL”: Normal manual tuning control. “AUTO MEMORY” Memorizes 6 stations with good reception automatically. Refer to <Auto Memory Entry> (page 21). “FORCED MONO” Reduces the noise when stereo broadcasts are received as monaural. “ON”/ “OFF” ( : Factory setting) 5 Make a setting Press the [  Turn the [VOL] knob.  ] button for at least 1 second. 6 Exit Function setting mode Remarks • FORCED MONO Strong electrical fields (such as from power lines) may cause unstable sound quality when it is set to ON. In such a situation, turn it OFF. 20 | DPX-3070B Station Preset Memory Putting a station in the memory. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the frequency to put in the memory Press the [4] or [¢] button. 1 Select the radio band you wish to store in the preset memory 2 Select the number to put in the memory Press the [1] – [6] button for at least 2 seconds. 2 Enter Function setting mode Press the [VOL] knob. ⁄ • Up to 6 stations with a different band (FM/AM) can be memorized to the [1] – [6] button according to the setting of “PRESET TYPE” of <Initial Settings> (page 28). 3 Enter Auto Memory Entry mode Turn the [VOL] knob and press it when the desired item is displayed. Select “SETTINGS” > “AUTO MEMORY”. 4 Open Auto Memory Entry Turn the [VOL] knob and press it when the desired item is displayed. When 6 stations that can be received are put in the memory, auto memory entry closes. English | 21 Tuner Operation Preset Tuning Recalling the stations in the memory. Function of remote control Direct access tuning Entering the frequency and tuning. 1 Select the radio band 2 Recalls the memorized station Press the [1] – [6] button. 1 Enter Direct access tuning mode Press the [DIRECT] button on the remote control. “– – – –” is displayed. Press the number buttons on the remote control. Select “SETTINGS” > “DISP & ILLUMI” > “COLOR SELECT”. Illumination Color Turn the [VOL] knob and press it when the desired item is displayed. Place Display and key Display Key Display “ALL” “DISPLAY” “KEY” 3 Select the place where you want to set the 4 Select the Illumination Color Turn the [VOL] knob and press it when the desired item is displayed. Select the color from “VARIABLE SCAN”, ”COLOR1” — ”COLOR24”, or “USER”. Creating “USER” color You can create your original color during the selection from ”COLOR1” — ”COLOR24”. The color you created can be called when you select “USER”. 1. Press the [VOL] knob for at least 1 second. Operation type Operation To select the color to adjust. (Range: 0 – 9) 3. Press the [VOL] knob. Exit the detail color adjustment mode. In Standby/ Auxiliary input source Information Display Source name “SOURCE NAME” Display off “DISP OFF MODE” ⁄ • When you select the Display off mode, the display setting of each source will be changed to the Display off. • If the selected display item does not have any information, alternative information is displayed. [. . . ]  Wire or insulate the speaker cable properly and press the reset button. If the “Protect” code does not disappear, consult your nearest service center. NA FILE: COPY PRO: An Audio file is played with a format that this unit can’t support. A copy-protected file is played. REAR ERROR: The file system of the connected USB device is broken. [. . . ]