User manual KENWOOD DPX-5050

[. . . ] • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ¤ CAUTION • Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. • Wipe off the dirt on the panel with a dry silicon or soft cloth. [. . . ] - <Audio Preset Memory> (page 39). - <Audio Preset Recall> (page 39). ( : Factory setting) 1 Select the source Audio Control You can adjust the following Audio Setting items. Display “Audio Control” “SubWoofer Level” Overview Press the [SRC] button. Select a source other than “STDBY”. Press the [VOL] knob. 2 Enter Function setting mode 3 Enter Audio Control mode Turn the [VOL] knob and press it when the desired item is displayed. Turn the [VOL] knob and press it when the desired item is displayed. Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. Press the [   ] button for at least 1 second. You can set subwoofer level. “–15” — “0” — “+15” “DSP Set” “Bypass”: Disables the DSP function. “Through”: Enables the DSP function. “Equalizer” Sets the sound quality. Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range. The bass and vocal sound of Music CD/ iPod is also supplemented. • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. 32 | B64-4805-00_01_DPXU6120_M_en. indd 32 11/02/02 15:07 Preset Equalizer curve Select You can select the following Equalizer curve. Display “Natural” “User” “Rock” “Pops” “Easy” “Top 40” “Jazz” “Game” “iPod” Equalizer curve Natural User* Rock Pops Easy Top 40 Jazz Game iPod (During iPod source only) Manual Equalizer Control You can adjust the following Equalizer Control items. Band “BAND1” (62. 5 Hz) “BAND2” (250 Hz) “BAND3” (1 kHz) “BAND4” (4 kHz) “BAND5” (16 kHz) Item “GAIN” Band level “EFCT” Bass Effect “GAIN” Band level “GAIN” Band level “GAIN” Band level “GAIN” Band level ( Range -9 ­–+9 dB “ON”/ “OFF” -9 ­–+9 dB -9 ­–+9 dB -9 ­–+9 dB -9 ­–+9 dB : Factory setting) *  he Equalizer curve set in the section <Manual Equalizer T Control> is recalled. ( : Factory setting) 1 Select the source Press the [SRC] button. Select a source other than “STDBY”. Press the [VOL] knob. 1 Select the source 2 Enter Function setting mode 3 Enter Manual Equalizer Control mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Audio Control” > “Equalizer” > “Manual Equalizer”. Press the [  Operation Turn the [VOL] knob. [. . . ] T The cell-phone has not been registered (pairing). Err No Matching: The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc. Too Soft: Too Loud: Too Long: Voice is too small and cannot be recognized. The word or utterance is too long to be recognized. No Phonebook: Data is not contained in the phone book. [. . . ]