User manual KENWOOD DPX-MP4050

[. . . ] • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply. [. . . ] During CD/ External disc play Repeat play Display Track Repeat "Repeat"/ "Track Repeat" + "REP" indicator Disc Repeat "Disc Repeat" + "D. REP" indicator (In Disc Changer) OFF During MP3/WMA play Repeat play Display File Repeat "File Repeat" + "REP" indicator Folder Repeat "Folder Repeat" + "REP" indicator OFF 1 Enter the Track number Press the number buttons on the remote. 2 Do Track/ File Search Press the [4] or [¢] button. Canceling Direct Track/File Search Press the [38] button. Direct Disc Search (Function of disc changers with remote) Doing Disc Search by entering the disc number. 1 Enter the disc number Press the number buttons on the remote. 2 Do Disc Search Press the [DISC+] or [DISC–] button. Canceling Direct Disc Search Press the [38] button. — 24 — DPX-MP4050_U. S_r1 2003. 07. 25 04:28 PM ページ25 Track Scan Searching the song you want to listen to by playing the first part of each song. You can search the song on disc, in MP3/WMA folder. Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, "M-Random" is displayed. When it's ON, "M. RDM" indicator is ON. When the [¢] button is pressed, the next song select starts. 1 Start Track Scan Press the [SCN] button. "Track Scan"/ "Scan" is displayed. "SCN" indicator is ON. 2 Release it when the song you want to listen to is played Press the [SCN] button. Random Play Play all the songs on the disc or MP3/WMA folder in random order. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "Random" is displayed. Example: When you want to set the beep sound select the "BEEP" display. 1-4 ¢ 4 4 Set the Function item Press the [4] or [¢] button. Example: When "BEEP" is selected, each time the button is pressed it switches "BEEP On" or "BEEP Off". You can continue by returning to step 3 and setting other items. 5 Exit Function Setting mode Press the [FNC] button. When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable are entered step by step. Function setting display — 29 — DPX-MP4050_U. S_r1 2003. 07. 25 04:28 PM ページ30 Function Setting System English Function items in Standby: Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP On" "BEEP Off" Setting Beep is heard. Beep canceled. Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 Select Security Code mode Switching Preout Switching the preout between the rear and non-fading. (In nonfading it outputs without effect from the fader control. ) Display "Preout REAR" "Preout N-F" Setting Rear preout. Select the "CODE STBY" display. 2 Enter Security Code mode Press the [38] button for at least 2 seconds. When "CODE WRITE" is displayed, "CODE ****" is displayed. 3 Enter the Security Code Press the [1] — [4] button. Example: If the Security Code is "3510". [. . . ] ☞ The unit checks all files on the loaded medium first. If the medium has many files recorded, it may take a long time for the unit before it starts playing MP3/WMA. Fails to play MP3/WMA in the intended order. 72 ✔ The MP3/WMA files were not written by the CD writer in the order in which you wanted them to be played. ☞ Depending on the CD writer, you may be able to set the order in which MP3/WMA files are to be played by writing them onto a medium with their file names beginning with play sequence numbers such as "01" to "99". [. . . ]