User manual KENWOOD DPX-MP4070B

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] Press the [3] button. Names of all the music are displayed in "SONGS" in the audio file. Selecting a music will play it from the beginning. 5 Play the selected music Press the Control knob. Cancelling File Select Press the [F. SEL] button. Scrolling the file/folder name display Push the Control knob toward up for at least 2 seconds. Cancelling File Select 1 Press the [F. SEL] button twice. 18 | English B64-3828-00_00_English. Indd 18 07. 4. 24 6:40:53 PM Function of non-iPod and non-"Music Editor" file Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. File Select 2 mode Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed. 1 Enter File Select 2 mode Press the [F. SEL] button twice. Folder name display Displays the current folder name. ⁄ • When the <Display Illumination Control> (page 22) is set to OFF, the display may black out while scrolling. 2 Select the folder Push the Control knob towards right or left. Each time you push the knob, the folders containing audio files are displayed one after another. Check the name of upper level folder Push the Control knob towards up. Each time you push the knob towards up, the folder just above the current folder is displayed. Each time you push the knob towards down, the folder just below the current folder is displayed. " " is displayed while the upper level folder is displayed. 3 Determine the folder Press the Control knob. The music in the determined folder are displayed. 4 Select the music you want to listen to Operation type Operation Movement between music Push the Control knob towards right or left. When "RE-ENTER" is displayed, "CODE" is also displayed. 5 Repeat step 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 8 Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. 7 Exit Security Code mode Press the [MENU] button. ⁄ • If you enter the wrong Code in steps 4 through 6, repeat from step 4. ⁄ • If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. 9 Exit Security Code mode Press the [MENU] button. English | 21 B64-3828-00_00_English. Indd 21 07. 4. 24 6:40:54 PM Menu system In Standby mode Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. ⁄ In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. [. . . ] And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. Discs are being exchanged in the Disc changer. The unit is reading the data on the disc. [. . . ]