User manual KENWOOD DPX-MP4090

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] With the up of the Control knob, you move 1 level down and with the down of the Control knob, 1 level up. Selecting a folder in the same level Push the Control knob towards right or left. With the left of the Control knob, you move to the previous folder, and with the right of the Control knob, to the next folder. Returning to the top level Press the [3] button. ⁄ • When you push the Control knob toward [¢], the next selected music starts. Function of disc changer 3 Decide the folder to play Press the Control knob. The Folder Select mode releases, and the Audio file in the folder being displayed plays. Magazine Random Play Play the music on all the discs in the disc changer in random order. Each time you press the button, the Magazine Random Play turns ON or OFF. When the Magazine Random mode is ON, "MGZN RDM" is displayed. Cancelling the Folder Select mode Press the [F. SEL] button. ⁄ • When you push the Control knob toward [¢], the next selected music starts. 18 | English B64-3609-00_English_r5. indd Sec1:18 06. 12. 6 3:00:44 PM Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. English | 19 B64-3609-00_English_r5. indd Sec1:19 06. 12. 6 3:00:44 PM Menu system Control knob MENU AUTO indicator SRC CRSC indicator Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. ⁄ • When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. Display "Open ON" "Open OFF" Setting Demonstration is carried out when Power is turned ON. Demonstration is not carried out when Power is turned ON. "CONT 11" In Standby mode In Standby mode Built-in Amp Setting Controlling the built-in amplifier. Turning OFF this control enhances the preout quality. Display "AMP ON" "AMP OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates. Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. 3 Adjust the hours Push the Control knob towards up or down. Adjust the minutes Push the Control knob towards right or left. In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display "AUX OFF" "AUX ON" Setting When selecting the source there’s no Auxiliary Input. When selecting the source there’s Auxiliary Input. 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Switching preout Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control. ) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD by force. [. . . ] Blank Skip functions at places that are recorded. ✔ Because the recording level is low, it’s recognized as not recorded. ☞ Turn Blank Skip OFF. The unit is malfunctioning for some reason. If the "E-77" code does not disappear, consult your nearest service center. [. . . ]