User manual KENWOOD DPX-MP4090S

[. . . ] For safety’s sake, leave the mounting and wiring work to professionals. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. [. . . ] The Folder Select mode releases, and the Audio file in the folder being displayed plays. Cancelling the Folder Select mode Press the [F. SEL] button. ⁄ • When you push the Control knob toward [¢], the next selected music starts. Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. Function of Audio file Folder Select Quickly selecting the folder you want to hear. ⁄ • When the <Display Illumination Control> (page 18) is set to OFF, the display may black out while scrolling. 1 Enter Folder Select mode Press the [F. SEL] button. During Select mode the folder information is displayed as shown below. English | 15 B64-3612-00_00_M_English. Indd 15 06. 12. 22 1:32:05 PM Menu system Control knob MENU SRC Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. ⁄ • When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards up or down. Example: When you want to set the beep sound select the "BEEP" display. In Standby mode Activating Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. 3 Set the menu item Push the Control knob towards right or left. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". Subwoofer preout. 4 Exit Clock adjustment mode Press the [MENU] button. Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display "DISP ON" "DISP OFF" Setting Keeps the display on. Turns off the display when you perform no operation for 5 seconds. In Standby mode Built-in Amp Setting Controlling the built-in amplifier. Turning OFF this control enhances the preout quality. Display "AMP ON" "AMP OFF" Setting The built-in amplifier activates. The built-in amplifier deactivates. ⁄ • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Ejecting the disc • Turning off the power • During function control, such as the Menu System, the display stays on. In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=44. 1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used. 18 | English B64-3612-00_00_M_English. Indd 18 06. 12. 22 1:32:06 PM Display "SPRM ON" "SPRM OFF" Setting Plays sound using the Supreme function. Plays the original sound stored in the audio file. When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. ⁄ • The sound effect may be imperceptible depending on the relationship between the audio file format and setting. 1 Select AMP Control mode Push the Control knob towards up or down. Select the "AMP CTRL" display. 2 Enter AMP Control mode Press the Control knob for at least 1 second. Other than Standby mode 3 Select the AMP Control item for adjustment Push the Control knob towards up or down. B. M. S. [. . . ] ☞ Connect the wire correctly, referring to the section on <Connecting Wires to Terminals> (page 24). Disc source ? The specified disc does not play, but another one plays instead. ✔ The disc is loaded in a different slot from that specified. ☞ Eject the disc magazine and check the number for the specified disc. ☞ Try another disc instead. Audio file source ? The sound skips when an Audio file is being played. [. . . ]