User manual KENWOOD DPX-MP4110

[. . . ] Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage. Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. [. . . ] The Folder Select mode releases, and the Audio file in the folder being displayed plays. English | 23 B64-3433-00_English_r1. indd 23 06. 3. 14 6:54:22 PM CD/USB device/Audio file/External disc control features Function of ACDrive media Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward [FM] for at least 2 seconds. • When the <Display Illumination Control> (page 27) is set to OFF, the display may black out while scrolling. Letter Seek You can search for the song, you want to play, by selecting the initial of Genre name, Artist name, or Album name. 1 Enter the Letter Seek mode Press the [S. MODE] button for at least 1 second. • This operation does not function when <All Random Play> (page 21) is ON. • This function is available only when the Play mode is set Genre, Artist, or Album. Cancelling the Letter Seek Press the [S. MODE] button. 2 Start the Letter Seek Push the Control knob towards [4] or [¢]. The initial of Genre name, Artist name, or Album name is displayed and announced in order. • The announcement of the initial can be canceled by <Voice Index> (page 30). • When you push the Control knob to the reverse [4] or [¢] during Letter Seek, the initial is displayed and announced in the reversed order. • Once Letter Seek starts, it cannot be cancelled. 3 Select the song to play Press the Control knob when the initial of the song you are searching is displayed and announced. The selected initial group plays. 24 | English B64-3433-00_English_r1. indd 24 06. 3. 14 6:54:23 PM Menu system Control knob MENU SRC Menu display Menu System Setting beep sound during operation, etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. • When other items those applicable to the basic operation method above are displayed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. Beep canceled. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display. • When the display is off, pressing any key will turn on the display. • When the display is off, you cannot perform any operation except for the following: • Volume • Attenuator • Selecting the source • Ejecting the disc • Turning off the power • During function control, such as the Menu System, the display stays on. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. In Standby mode Dimmer Dimming this unit’s display automatically when the vehicle light switch is turned ON. Display "DIM ON" "DIM OFF" Setting The display dims. The display doesn’t dim. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode Switching preout In Standby mode Indirect Lighting You can illuminate the area around the display with soft indirect lighting. Display "LGHT ON" "LGHT OFF" Setting Turns indirect lighting on. Turns indirect lighting off. Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control. ) Display "SWPRE R" "SWPRE SW" Setting Rear preout. Subwoofer preout. English | 27 B64-3433-00_English_r1. indd 27 06. 3. 14 6:54:24 PM Menu system In Standby mode Other than Standby mode Built-in Amp Setting Controlling the built-in amplifier. [. . . ] Or the unit is malfunctioning for some reason. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center. ? NO DISC: ? TOC ERR: USB device source READ ERR: ? The USB device is not detected. ☞ Connect the connector of the USB device properly. [. . . ]