User manual KENWOOD DPX-MP5110U

[. . . ] • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] When the disc/track has been selected, play will begin. NOTE 1 Play the disc whose name you want to preset. NOTE • This function is not available for disc changers that do not feature the Disc Name Preset function. • This procedure is not to be used to store the disc and track titles for MDs that you record. • This function cannot be available during the clock display and while using disc scan or magazine random play. This function is not available with the following models: KDC-C200/C300/C400/C301/C401 2 Press the NAME. S button for at least two seconds. "Name Set" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 2 To change the track being heard, press the ¢ button. Another disc/track will be selected and played. NOTE 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. • Magazine random play is canceled when you eject the disc. • The time needed for random selection depends on the number of discs loaded in the disc magazine. 4 Each time the COL button is pressed, the characters to be Text / Title Scroll (Function of MD/disc changers) This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll automatically: Press the DISP button to display the disc title or the track title. The display of the text will be scrolled repeatedly. To scroll manually: 1 Press the DISP button to display the disc title or the track title. Press the DISC+ or DISC– button to display the desired character. The DSP indicator blinks during the DSP control mode. Be sure to turn the GraphicEqualizer mode on when performing the operations described below in the Graphic Equalizer features. Turning the Graphic Equalizer Mode Off: Press the EQ button for at least one second. NOTE 2 Each time you press the DSP button, the sound field control switches as follows; w If you make no button operation for 10 seconds, the Graphic equalizer mode is automatically canceled. ""Stadium" w Recreates the gree and full sound of a large stadium. "Concert Hall" Reproduces a larger space inside the vehicle to recreate the live feel of a concert arena. w "Club Disco" w Fully reproduces the lively beat sound of a small disco club. Reproduces the reverberation effects of a traditional European cathedral. Faithfully reproduces the source under optimum acoustic conditions as in a living room. Outputs the sound source as-is without added effects. "Church" w "Listening" w Bypass" — 20 — Preset Equalizer(KBS - Kenwood Built-in Sound) Selection You can choose the equalizer from five settings whose sound qualities are preset to match music or vehicle characteristics. Switching the Preset Equalizer: Graphic Equalizer Preset Memory Up to three graphic equalizer curves can be stored in the memory, and then you can recall that equalizer curve with a single touch of a button. 1 Press the EQ button. "EQ CTRL" is displayed once the Graphic Equalizer mode is entered. The preset equalizer name currently set appears in the display. 1 Press the EQ button. "EQ CTRL" is displayed once the Graphic Equalizer mode is entered. The preset equalizer name currently set appears in the display. 2 Each time you press the EQ button, the preset equalizer switches as follows; 3 "Rock" 3 "Pops" 3 "Dance" 3 "Vocal" 3 "Flat" 2 Adjust the graphic equalizer curve that you want to store in the memory. 3 Press the button (#1-3) that you want to use for the Graphic Equalizer curve for at least two seconds. "EQ Memory-#" blinks once in the display to indicate that the data has stored. 3 Press the EQ button for at least one second to end the Graphic Equalizer mode. 4 Press the EQ button for at least one second to end the Graphic Equalizer mode. [. . . ] The disc is severely scratched. The sound skips. Something is touching the disc changer. The CD is scratched or dirty. The display shows that the changer is being played, but no sound can be heard. Track repeat, disc repeat, track scan, disc scan, random play, and magazine random play start by themselves. CD-R or CD-RW will not play. The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. [. . . ]