User manual KENWOOD DPX-U5130BT

[. . . ] • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. 2CAUTION To prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply. [. . . ] To cancel DNPP mode: Press the SBF button for at least one second. The disc name preset play (DNPP) mode will be canceled. Please see the function set system settings (page 33) about switching between manual scrolling and automatic scrolling. Disc Name Preset Play (DNPP)(Function of disc changers) If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it. 1 Press the SBF button for at least one second. "SBF DNPS/SBF Disc" will appear in the display, and the disc name preset play mode is entered. The preset names/disc titles of the disc in the disc changer to which you are currently listening are successively displayed for five seconds each. In any of the units that are connected, discs that have not been disc name preset will display "No Name". NOTE • You cannot use this function while doing track or disc repeat or track or disc scan or using random or magazine random play. • Discs in the disc changer that have never been played before will appear as "No Access" when the disc names are displayed. When you cannot identify a disc because of the "No Access" — 21 — CD/External disc control features English Presetting Disc Names Store the names of discs to be displayed when played. Direct Alphabet Input (Function of remote) You can directly input letters using the number/letter entry buttons on the remote. Example: Use the following table to enter the name "DANCE". Character Button to press # Times pressed NOTE 1 Play the disc whose name you want to preset. NOTE • This function is available only for the CD player of this unit and disc changers that feature the Disc Name Preset function. • This procedure is not to be used to store the disc and track titles for MDs that you record. • This function cannot be available during the clock display and while using disc scan or magazine random play. “D” “A” “N” “C” “E” the name. #3 #2 #6 #2 #3 1 1 2 3 2 2 Press the NAME button for at least two seconds. "Name Set" is displayed and the disc name preset mode is entered. • If you make no button operation for 10 seconds, the DSP control mode is automatically canceled. Turning the DSP Off: Press the OFF button for at least one second. DSP Bass Boost Control Level Adjustment This function can add the original bass sounds to the insufficient bass sounds from the rear during using the DSP effects for correction. Sound Field Control This function reproduces many different virtual sound fields such as of a concert hall within a vehicle. Switching the Sound Field Control: 1 Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered. The DSP indicator blinks during the DSP control mode. 1 Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered. The DSP indicator blinks during the DSP control mode. 2 Each time you press the 4 or ¢ button, the width of 2 Each time you press the SFC button, the sound field control switches as follows; ➨ "Stadium" ➨ "Concert Hall" ➨ "Live House" ➨ "Theater" ➨ "Disco" ➨ "Club Disco" ➨ "Jazz Club" ➨ "Studio" ➨ "Listening" ➨ "Church" ➨ "Bypass" ➨ frequency band for the bass boost switches as follows; "DBB STEP 1" (narrow band) j "DBB STEP 2" j "DBB STEP 3" (wide band) NOTE • This adjustment cannot be made when the Sound Field Control is set to "Bypass". • The default setting is "STEP 2". 3 Press the DSP button to end the DSP control mode. 3 Press the DSP button to end the DSP control mode. — 24 — Compression Control Level Adjustment This function can compress the dynamic range of music, so that low sounds which are covered over by road noise can be raised. 4 Press the DSP button to end the DSP control mode. 1 Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered. The DSP indicator blinks during the DSP control mode. Room Size Setting This function can set the DSP effects for various room sizes. 2 Each time you press the COMP button, the compression level switches as follows; ➨ "Comp Off" ➨ "Comp STEP 1" (Compression level is lower) ➨ "Comp STEP 2" ➨ "Comp STEP 3" (Compression level is higher) ➨ NOTE 1 Press the DSP button. "DSP CTRL" is displayed once the DSP control mode is entered. [. . . ] Take the recommended actions. EJECT No Disc No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. No disc has been loaded in the disc magazine. ] Load a disc into the disc magazine. — 42 — Error 04 No disc has been loaded in the disc magazine. [. . . ]