User manual KENWOOD DPX502

[. . . ] DUAL DIN SIZED CD RECEIVER DPX502 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DPX502 Serial number US Residence Only Register Online Register your Kenwood product at www. kenwoodusa. com © B64-3826-00/00 (KW) Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Switching Display 3 4 7 HD Radio control features About HD Radio Tuning 22 Menu system Menu System Activating Security Code Deactivating Security Code Touch Sensor Tone Manual Clock Adjustment Synchronize Clock Display Illumination Control Dimmer Switching preout Built-in Amp Setting Dual Zone System Setting Supreme Setting Traffic Information CRSC (Clean Reception System Circuit) Receive mode Setting Electronic Serial Number (ESN) display Auxiliary Input Display Setting Text Scroll Built-in Auxiliary input Setting CD Read Setting Audio Preset Memory Audio Preset Recall Firmware version display Demonstration mode Setting 23 Tuner features Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning 12 RDS features Radio Text Scroll PTY (Program Type) Registration of a station as a PTY Program Type preset 14 CD/USB device/Audio file/External disc control features 16 Playing CD & Audio file USB Device Connection Playing USB (iPod) device Drive Search Playing External Disc Fast Forwarding and Reversing Music Search Disc Search/Folder/Album Search Direct Music Search Direct Disc Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play All Random Play File select File Select 1 mode File Select 2 mode Text/Title Scroll Basic Operations of remote control 30 Accessories/ Installation Procedure 32 Connecting Wires to Terminals Installing the Escutcheon Installation Removing the Unit Troubleshooting Guide Specifications 33 34 35 36 37 40 2| English Safety precautions 2WARNING To prevent injury or fire, take the following precautions: · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. [. . . ] (Normally the setting listed at the top of the chart is the original setting. ) Also, the explanation for items that are not applicable (<Manual Clock Adjustment> etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Push the Control knob towards up or down. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Push the Control knob towards right or left. Example: When you select "BEEP", each time you push the knob it alternates between "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. English | 23 Menu system In Standby mode Activating Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. Now, you can use the unit. / · You can set the Security Code with a 4 digit number of your choice. · The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. / · When the Security Code function is activated, "CODE SET" changes to "CODE CLR". · To deactivate the Security Code function, see the next section <Deactivating Security Code>. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. In Standby mode 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "MENU" is displayed, "CODE SET" is also displayed. Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code mode Push the Control knob towards up or down. Select the "CODE CLR" display. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 2 Enter Security Code mode Press the Control knob for at least 1 second. When "ENTER" is displayed, "CODE" is also displayed. 4 Select the digits to enter Push the Control knob towards right or left. 5 Select the Security Code numbers Push the Control knob towards up or down. 3 Select the digits to enter Push the Control knob towards right or left. 6 Repeat step 4 and 5, and complete the Security Code. 4 Select the Security Code numbers Push the Control knob towards up or down. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is also displayed. 5 Repeat step 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "CLEAR" is displayed. The Security Code function deactivates. 8 Do the step 4 through 7 operation, and reenter the Security Code. The Security Code function activates. 7 Exit Security Code mode Press the [MENU] button. / · If you enter the wrong Code in steps 4 through 6, repeat from step 4. / · If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code. 9 Exit Security Code mode Press the [MENU] button. 24 | English In Standby mode Display Illumination Control This function turns off the display when you perform no operation for 5 seconds. [. . . ] The unit is reading the data on the disc. The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. IN (Blink): The CD player section is not operating properly. [. . . ]