User manual KENWOOD FP533

[. . . ] FP510 series FP520 series FP530 series 1 safety G liquidiser blade unit sealing ring jug lid filler cap G G G G G G G G G G G G G G G G a The blades and discs are very sharp, handle with care. Always hold the knife blade by the finger grip a k at the top, away from the cutting edge, both when handling and cleaning. Always remove the knife blade before pouring contents from the bowl. Keep hands and utensils out of the processor bowl and liquidiser jug whilst connected to the power supply. [. . . ] It can also be used for yeasted dough mixes if the dough tool is not supplied. 22 k 23 k 24 k 3 safety G G k mill 26 Use the mill for milling herbs, nuts and coffee beans. blade unit sealing ring jar sprinkler lid k d Never remove the lid until the cutting disc has completely stopped. Handle the cutting discs with care - they are extremely sharp to use the cutting discs 1 Fit the drive shaft and bowl onto the power unit. 2 Holding by the centre grip k, place the disc onto the d drive shaft with the appropriate side uppermost k . 4 Choose which size feed tube you want to use. The pusher contains a smaller feed tube for processing individual items or thin ingredients. To use the small feed tube - first put the large pusher inside the feed tube. To use the large feed tube - use both pushers together. 6 Switch on and push down evenly with the pusher never put your fingers in the feed tube. G G e k safety G G G G Never fit the blade unit to your machine without the jar fitted. Never unscrew the jar while the multi-mill is fitted to your machine. Never remove the multi-mill until the blades have completely stopped. important To ensure long life of your mill, never run for longer than 30 seconds. Switch off as soon as you've got the right consistency. Don't process spices - they may damage the plastic. The machine won't work if the mill is fitted incorrectly. Use for dry ingredients only. G G G G G G G hints Use fresh ingredients Don't cut food too small. Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. When using the chipper disc, place ingredients horizontally. When slicing or shredding: food placed upright k comes out shorter than food f g placed horizontally k. There will always be a small amount of waste on the plate or in the bowl after processing. to use your mill 1 Put your ingredients into the jar. 2 Fit the sealing ring into the blade unit. [. . . ] Fold the flour in carefully by hand using a metal spoon. Pour the mixture into a deep lined and greased 7"/18cm cake tin. Bake in a preheated oven at 190°C/375°F/Gas Mark 5 for approximately 25minutes or until the cake springs back when touched. 5 Remove from the tin and cool on a wire rack. [. . . ]